CY8C21123_12 Datasheet, PDF (25/44 Pages) Cypress Semiconductor – PSoC® Programmable System-on-Chip™

CY8C21123, CY8C21223, CY8C21323
AC General Purpose I/O Specifications
Table 24 lists the guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25 V and
–40 °C  T_A  85 °C, 3.0 V to 3.6 V and –40 °C  T_A  85 °C, or 2.4 V to 3.0 V and –40 °C  T_A  85 °C, respectively. Typical parameters
apply to 5 V, 3.3 V, or 2.7 V at 25 °C and are for design guidance only.
Table 24. 5-V and 3.3-V AC GPIO Specifications
Symbol
F_GPIO
tRiseF
tFallF
tRiseS
tFallS
Description
GPIO operating frequency
Rise time, normal strong mode, Cload = 50 pF
Fall time, normal strong mode, Cload = 50 pF
Rise time, slow strong mode, Cload = 50 pF
Fall time, slow strong mode, Cload = 50 pF
Min Typ Max Units
Notes
0
–
12
MHz Normal strong mode
3
–
18
ns V_DD = 4.5 V to 5.25 V, 10% to 90%
2
–
18
ns V_DD = 4.5 V to 5.25 V, 10% to 90%
10
27
–
ns V_DD = 3 V to 5.25 V, 10% to 90%
10
22
–
ns V_DD = 3 V to 5.25 V, 10% to 90%
Table 25. 2.7-V AC GPIO Specifications
Symbol
F_GPIO
tRiseF
tFallF
tRiseS
tFallS
Description
GPIO operating frequency
Rise time, normal strong mode, Cload = 50 pF
Fall time, normal strong mode, Cload = 50 pF
Rise time, slow strong mode, Cload = 50 pF
Fall time, slow strong mode, Cload = 50 pF
Min Typ Max Units
Notes
0
–
3
MHz Normal strong mode
6
–
50
ns V_DD = 2.4 V to 3.0 V, 10% to 90%
6
–
50
ns V_DD = 2.4 V to 3.0 V, 10% to 90%
18
40
120
ns V_DD = 2.4 V to 3.0 V, 10% to 90%
18
40
120
ns V_DD = 2.4 V to 3.0 V, 10% to 90%
Figure 13. GPIO Timing Diagram
90%
GPIO
Pin
10%
TRi se F
TRi se S
TFallF
TFallS
AC Amplifier Specifications
The following tables list the guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25
V and –40 °C  T_A  85 °C, 3.0 V to 3.6 V and –40 °C  T_A  85 °C, or 2.4 V to 3.0 V and –40 °C  T_A  85 °C, respectively. Typical
parameters apply to 5 V, 3.3 V, or 2.7 V at 25 °C and are for design guidance only.
Settling times, slew rates, and gain bandwidth are based on the analog continuous time PSoC block.
Table 26. 5-V and 3.3-V AC Amplifier Specifications
Symbol
t_COMP1
t_COMP2
Description
Comparator mode response time, 50 mVpp signal centered on Ref
Comparator mode response time, 2.5 V input, 0.5 V overdrive
Min
Typ
Max
Units
–
–
100
ns
–
–
300
ns
Table 27. 2.7-V AC Amplifier Specifications
Symbol
t_COMP1
t_COMP2
Description
Comparator mode response time, 50 mVpp signal centered on Ref
Comparator mode response time, 1.5 V input, 0.5 V overdrive
Min
Typ
Max
Units
–
–
600
ns
–
–
300
ns
Document Number: 38-12022 Rev. *U
Page 25 of 44