CY8CPLC10 Datasheet, PDF (23/25 Pages) Cypress Semiconductor – Powerline Communication Solution

CY8CPLC10
Development Tools
The development kits do not have on-board Powerline capability,
but can be used with a PLC kit for development purposes. All
development tools and development kits are sold at the Cypress
Online Store.
CY3215-DK Basic Development Kit
The CY3215-DK is for prototyping and development with PSoC
Designer. This kit can be used in conjunction with the PLC kits
to support in-circuit emulation. The software interface enables
users to run, halt, and single step the processor and view the
content of specific memory locations. PSoC Designer also
supports the advanced emulation features. The kit includes:
■ PSoC Designer Software CD
■ ICE-Cube In-Circuit Emulator
■ ICE Flex-Pod for CY8C29x66 Family
■ Cat-5 Adapter
■ Mini-Eval Programming Board
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ iMAGEcraft C Compiler (Registration Required)
■ ISSP Cable
■ USB 2.0 Cable and Blue Cat-5 Cable
■ 2 CY8C29466-24PXI 28-PDIP Chip Samples
Device Programmers
All device programmers are purchased from the Cypress Online
Store.
CY3216 Modular Programmer
The CY3216 Modular Programmer kit features a modular
programmer and the MiniProg1 programming unit. The modular
programmer includes three programming module cards and
supports multiple Cypress products. The kit includes:
■ Modular Programmer Base
■ 3 Programming Module Cards
■ MiniProg Programming Unit
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
CY3207 ISSP In-System Serial Programmer (ISSP)
The CY3207ISSP is a production programmer. It includes
protection circuitry and an industrial case that is more robust than
the MiniProg in a production programming environment.
Note that CY3207ISSP needs special software and is not
compatible with PSoC Programmer. The kit includes:
■ CY3207 Programmer Unit
■ PSoC ISSP Software CD
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ USB 2.0 Cable
Third Party Tools
Several tools are specially designed by the following third party
vendors to accompany PSoC devices during development and
production. Specific details of each of these tools are found at
http://www.cypress.com under Design > Evaluation Boards.
Build a PSoC Emulator into Your Board
For details on emulating the circuit before going to volume pro-
duction using an on-chip debug (OCD) non-production PSoC
device, see Application Note “Debugging - Build a PSoC
Emulator into Your Board - AN2323” at
http://www.cypress.com/design/AN2323.
Document Number: 001-50001 Rev. *D
Page 23 of 25
[+] Feedback