MB3793-27A Datasheet, PDF (22/30 Pages) Fujitsu Component Limited. – Power Voltage Monitoring IC with Watchdog Timer

MB3793-27A
13. Notes On Use
• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 k to 1 M resistors in series.
• Do not apply a negative voltage
- Applying a negative voltage of 0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
14. Ordering Information
Part number
Package
MB3793-27APF-❏❏❏
MB3793-27APNF-❏❏❏
MB3793-27APF-❏❏❏E1
MB3793-27APNF-❏❏❏E1
8-pin Plastic SOP
(FPT-8P-M01)
8-pin Plastic SOP
(FPT-8P-M02)
8-pin Plastic SOP
(FPT-8P-M01)
8-pin Plastic SOP
(FPT-8P-M02)
Marking
3793-Y
3793-Y
3793-Y
3793-Y
Remarks
conventional version
conventional version
Lead Free version
Lead Free version
15. RoHS Compliance Information of Lead (Pb) Free version
The LSI products of Cypress with “E1” are compliant with RoHS Directive , and has observed the standard of lead, cadmium,
mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
Document Number: 002-08550 Rev. *A
Page 22 of 30