CY8C20110_09 Datasheet, PDF (21/29 Pages) Cypress Semiconductor – CapSense Express Button Capacitive Controllers

CY8C20110/CY8C20180/CY8C20160
CY8C20140/CY8C20142
Electrical Specifications
Absolute Maximum Ratings
Parameter
Description
Min Typ Max Unit
Notes
T_STG
Storage temperature
–55 25 +100 °C Higher storage temperatures reduce data
retention time. Recommended storage
temperature is +25°C ± 25°C (0°C to 50°C).
Extended duration storage temperatures
above 65°C degrade reliability
T_A
Ambient temperature with power
–40
–
+85
°C
applied
V_DD
V_IO
V_IOZ
I_MIO
ESD
Supply voltage on V_DD relative to V_SS –0.5
–
+6.0
V
DC input voltage
V_SS – 0.5 – V_DD + 0.5 V
DC voltage applied to tristate
V_SS – 0.5 – V_DD + 0.5 V
Maximum current into any GPIO pin –25
–
+50
mA
Electro static discharge voltage
2000 –
–
V Human body model ESD
LU
Latch up current
–
–
200
mA
Operating Temperature
Parameter
Description
T_A
Ambient temperature
T_J
Junction temperature
Min Typ Max Unit
–40
–
+85
°C
–40
–
+100 °C
Notes
DC Electrical Characteristics
DC Chip Level Specifications
Parameter
Description
Min Typ Max Unit
Notes
V_DD
Supply voltage
2.40
–
5.25
V
I_DD
Supply current
–
1.5
2.5
mA Conditions are V_DD = 3.10V, T_A = 25°C
ISB
Deep Sleep mode current with POR –
2.6
4
µA VDD = 2.55V, 0°C < TA < 40°C
and LVD active
ISB
Deep Sleep mode current with POR –
2.8
5
µA VDD = 3.3V, –40°C < TA < 85°C
and LVD active
ISB
Deep Sleep mode current with POR –
5.2
6.4
µA VDD = 5.25V, –40°C < TA < 85°C
and LVD active
5V and 3.3V DC General Purpose I/O Specifications
This table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V and
-40°C<TA<85°C, 3.10V to 3.6V -40°C<TA<85°C. Typical parameters apply to 5V and 3.3V at 25°C and are for design guidance only.
Parameter
Description
Min
Typ
VOH1
High output voltage on Port 0 pins VDD – 0.2 –
VOH2
High output voltage on Port 0 pins VDD – 0.9 –
VOH3
High output voltage on Port 1 pins VDD – 0.2 –
VOH4
High output voltage on Port 1 pins VDD – 0.9 –
Max
–
–
–
–
Unit
Notes
V IOH < 10 µA, VDD > 3.10V, maximum of
20 mA source current in all I/Os.
V IOH = 1 mA, VDD > 3.10V, maximum of
20 mA source current in all I/Os.
V IOH < 10 µA, VDD > 3.10V, maximum of
20 mA source current in all I/Os.
V IOH = 5 mA, VDD > 3.10V, maximum of
20 mA source current in all I/Os.
Document Number: 001-54606 Rev. **
Page 21 of 29
[+] Feedback