LUPA1300-2 Datasheet, PDF (2/2 Pages) Cypress Semiconductor – 500 FPS High Speed CMOS Sensor Product Brief

LUPA 1300-2
General Specifications
Parameter
Active Pixels
Pixel Size
Pixel Type
Pixel Rate
Shutter Type
Frame Rate
Master Clock
Windowing (ROI)
Read Out
ADC Resolution
Sensitivity
Extended Dynamic Range
Specifications
1280 (H) x 1024 (V)
14 µm x 14 µm
Pipelined shutter pixel
620 Mbps per channel (12 serial
LVDS outputs)
Pipelined and Triggered Global
Shutter
500 fps at 1.3 Mpixel (can be
boosted by subsampling and win-
dowing).
315Mhz for 500 fps
Randomly programmable ROI read
out up to four multiple windows
Windowed, flipped, mirrored, and
subsampled read out possible
10 bit, on-chip
10.16 V/lux.s @ 550nm
Multiple slope (up to 90 dB optical
dynamic range)
Electro-Optical Specifications
Parameter
Conversion gain
Full well charge
Responsivity
Fill factor
Parasitic light sensitivity
Dark noise
QE x FF
FPN
PRNU
Dark signal
Power dissipation
Value
34uV/e
30000e
7350 V.m2/W.s @680nm
40%
< 1/10000
37e^-
35% @ 680nm
2% of Vsat
<1% of Vsignal
170mV/s @ 30°C
1.2W
Document History Page
Document Title: LUPA 1300-2, 500 FPS High Speed Image Sensor
Document Number:
REV ECN
Orig. of Change
Submission Date
** 2598181
VED
October 29, 2008
Description Of Change
New image sensor document
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. For more infor-
mation on Image sensors, please contact at [e-mail].
Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications.
Consumer applications include the fast growing high volume cell phone, digital still cameras as well as automotive applications.
Cypress' customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large
dynamic range, and high sensitivity.
© Cypress Semiconductor Corporation, 2008. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any
circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical,
life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical
components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Document Number: 001-49820 Rev. **
Revised October 29, 2008
All products and company names mentioned in this document may be the trademarks of their respective holders.
Page 2 of 2