ACM100 Datasheet, PDF (18/20 Pages) Cypress Semiconductor – Automotive Camera Module

ACM100
Environmental Specifications
Specification
Value
Comment
Normal Operating Temperature
Degraded Operating
Temperature
– 40°C to +85°C
– 40°C to +115 °C
See General Specifications for sensitivity de-rating
over temperature. Video performance guaranteed
from –40°C to +85 °C
Storage Temperature
– 40°C to +130 °C
Humidity
100% relative humidity
Salt Mist Atmosphere
Passenger compartment compliant
Dust
Chemical Resistance
Passenger compartment compliant ^{100 mg/m3}
Leather wax, anti-mist spray, cleaning soap, deodoriz-
Passenger compartment compliant er spray, coffee, tea, soft drinks
Performance Specifications
The ACM100 module is intended to support a variety of applications, many with differing optical field of view requirements. To
facilitate the differences, the ACM100 module is available with a selection of lenses. The following table summarizes the general
performance of the camera and at 25^oC. Data are for imager (IM103) performance. Performance specifications will vary based
on lens selection. Specifications of available lenses are described in later sections.
Parameter
Resolution
FPN
Response nonuniformity
Minimum illumination
Responsivity
Noise Equivalent Irradiation
Pixel pitch
Defective Pixels
Online temperature estimate
Dynamic Range
Value
640H X 480V
<0.1% of full signal rms
<1.0% rms
1 mW/m2
>10 V/lux-sec
1.5 nW/cm2 @ 525 nm
3 nW/cm2 @ 850 nm
6 nW/cm2 @ 940 nm
8 microns square
<80
0 clusters
Mean dark signal register
120 dB captured
Notes
Additional columns/rows for image processing
Excluding temporal noise sources
Standard deviation from the mean photo response
from 10 to 90% of full signal
850nm faceplate power SNR>10 required @
30fps and 85 C (Signal over temporal noise)
irradiance required to achieve an SNR of 1
Configurable defect correction available
Document Number: 001-05325 Rev. **
Page 18 of 20