CY37256P160-125UMB Datasheet, PDF (15/64 Pages) Cypress Semiconductor – 5V, 3.3V, ISR™ High-Performance CPLDs

Ultra37000 CPLD Family
Inductance^[5]
44-Lead 44-Lead 44-Lead 84-Lead 84-Lead 100-Lead 160-Lead 208-Lead
Parameter Description Test Conditions TQFP PLCC CLCC PLCC CLCC TQFP TQFP PQFP Unit
L
Maximum Pin V_IN = 5.0V
2
5
2
8
5
8
9
11 nH
Inductance at f = 1 MHz
Capacitance^[5]
Parameter
Description
Test Conditions
Max.
Unit
C_I/O
Input/Output Capacitance
V_IN = 5.0V at f = 1 MHz at T_A = 25°C
10
pF
C_CLK
C_DP
Clock Signal Capacitance
V_IN = 5.0V at f = 1 MHz at T_A = 25°C
12
pF
Dual-Function Pins^[9]
V_IN = 5.0V at f = 1 MHz at T_A = 25°C
16
pF
Endurance Characteristics^[5]
Parameter
Description
N
Minimum Reprogramming Cycles
Test Conditions
Normal Programming Conditions^[2]
Min.
1,000
Typ.
10,000
Unit
Cycles
3.3V Device Characteristics
Maximum Ratings
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature ................................. –65°C to +150°C
Ambient Temperature with
Power Applied............................................. –55°C to +125°C
Supply Voltage to Ground Potential ............... –0.5V to +4.6V
Operating Range^[2]
DC Voltage Applied to Outputs
in High-Z State................................................–0.5V to +7.0V
DC Input Voltage ............................................–0.5V to +7.0V
DC Program Voltage............................................. 3.0 to 3.6V
Current into Outputs ...................................................... 8 mA
Static Discharge Voltage........................................... > 2001V
(per MIL-STD-883, Method 3015)
Latch-up Current..................................................... > 200 mA
Range
Commercial
Ambient Temperature^[2]
0°C to +70°C
Junction Temperature
0°C to +90°C
V_CC^[10]
3.3V ± 0.3V
Industrial
Military^[3]
–40°C to +85°C
–55°C to +125°C
–40°C to +105°C
–55°C to +130°C
3.3V ± 0.3V
3.3V ± 0.3V
3.3V Device Electrical Characteristics Over the Operating Range
Parameter
Description
V_OH
Output HIGH Voltage
V_OL
Output LOW Voltage
V_IH
Input HIGH Voltage
Test Conditions
V_CC = Min.
V_CC = Min.
I_OH = –4 mA (Com’l)^[4]
I_OH = –3 mA (Mil)^[4]
I_OL = 8 mA (Com’l)^[4]
I_OL = 6 mA (Mil)^[4]
Guaranteed Input Logical HIGH Voltage for
all Inputs^[7]
Min.
2.4
2.0
Max.
0.5
5.5
V_IL
Input LOW Voltage
Guaranteed Input Logical LOW Voltage for –0.5
0.8
all Inputs^[7]
I_IX
Input Load Current
V_I = GND OR V_CC, Bus-Hold Disabled
–10
10
I_OZ
Output Leakage Current
V_O = GND or V_CC, Output Disabled,
Bus-Hold Disabled
–50
50
I_OS
Output Short Circuit Current^{[5, 8]}
V_CC = Max., V_OUT = 0.5V
–30 –160
I_BHL
Input Bus-Hold LOW Sustaining Current V_CC = Min., V_IL = 0.8V
+75
I_BHH
Input Bus-Hold HIGH Sustaining Current V_CC = Min., V_IH = 2.0V
–75
I_BHLO
Input Bus-Hold LOW Overdrive Current V_CC = Max.
+500
I_BHHO
Input Bus-Hold HIGH Overdrive Current V_CC = Max.
–500
Notes:
9. Dual pins are I/O with JTAG pins.
10. For CY37064VP100-143AC, CY37064VP100-143BBC, CY37064VP44-143AC, CY37064VP48-143BAC; Operating Range: V_CC is 3.3V± 0.16V.
Unit
V
V
V
V
µA
µA
mA
µA
µA
µA
µA
Document #: 38-03007 Rev. *E
Page 15 of 64