English
Language : 

CY8C20336H Datasheet, PDF (13/33 Pages) Cypress Semiconductor – Haptics Enabled CapSense Controller 1.71-V to 5.5-V operating range
◁
CY8C20336H, CY8C20446H
Table 8. 2.4 V to 3.0 V DC GPIO Specifications
Symbol
Description
Conditions
Min
Typ
RPU
VOH1
Pull-up resistor
High output voltage
port 2 or 3 pins
4
5.60
IOH < 10 μA, maximum of 10 mA source VDD – 0.20 –
current in all I/Os
VOH2
High output voltage
port 2 or 3 pins
IOH = 0.2 mA, maximum of 10 mA
source current in all I/Os
VDD – 0.40 –
VOH3
High output voltage
port 0 or 1 pins with LDO regulator
disabled for port 1
IOH < 10 μA, maximum of 10 mA source VDD – 0.20 –
current in all I/Os
VOH4
High output voltage
port 0 or 1 pins with LDO regulator
disabled for port 1
IOH = 2 mA, maximum of 10 mA source VDD – 0.50 –
current in all I/Os
VOH5A High output voltage
IOH < 10 μA, VDD > 2.4 V, maximum of 1.50
1.80
port 1 pins with LDO enabled for 1.8 V 20 mA source current in all I/Os
out
VOH6A High output voltage
IOH = 1 mA, VDD > 2.4 V, maximum of 1.20
–
port 1 pins with LDO enabled for 1.8 V 20 mA source current in all I/Os
out
VOL
Low output voltage
IOL = 10 mA, maximum of 30 mA sink
–
–
current on even port pins (for example,
P0[2] and P1[4]) and 30 mA sink
current on odd port pins (for example,
P0[3] and P1[5])
VIL
VIH
VH
IIL
CPIN
Input low voltage
Input high voltage
Input hysteresis voltage
Input leakage (absolute value)
Capacitive load on pins
Package and pin dependent
Temp = 25 °C
–
–
1.40
–
–
80
–
1
0.50
1.70
Max Units
8
kΩ
–
V
–
V
–
V
–
V
2.10
V
–
V
0.75
V
0.72
V
–
V
–
mV
1000
nA
7
pF
Table 9. 1.71 V to 2.4 V DC GPIO Specifications
Symbol
Description
RPU
VOH1
Pull-up resistor
High output voltage
port 2 or 3 pins
VOH2
High output voltage
port 2 or 3 pins
VOH3
High output voltage
port 0 or 1 pins with LDO regulator
disabled for port 1
VOH4
High output voltage
port 0 or 1 pins with LDO regulator
disabled for port 1
VOL
Low output voltage
VIL
Input low voltage
VIH
Input high voltage
Conditions
Min
Typ
4
5.60
IOH = 10 μA, maximum of 10 mA source VDD – 0.20 –
current in all I/Os
IOH = 0.5 mA, maximum of 10 mA
source current in all I/Os
VDD – 0.50 –
IOH = 100 μA, maximum of 10 mA
source current in all I/Os
VDD – 0.20 –
Max Units
8
kΩ
–
V
–
V
–
V
IOH = 2 mA, maximum of 10 mA source VDD – 0.50 –
current in all I/Os
–
V
IOL = 5 mA, maximum of 20 mA sink
–
current on even port pins (for example,
P0[2] and P1[4]) and 30 mA sink
current on odd port pins (for example,
P0[3] and P1[5])
–
0.40
V
–
– 0.30 × VDD V
0.65 × VDD –
–
V
Document Number: 001-56223 Rev. *C
Page 13 of 33
[+] Feedback
 ▷