CYV15G0101EQ_07 Datasheet, PDF (1/10 Pages) Cypress Semiconductor – Multi Rate Video Cable Equalizer

CYV15G0101EQ
Multi Rate Video Cable Equalizer
Features
■ Multi rate adaptive equalization
■ Operates from 143 to 1485 Mbps serial data rate
■ SMPTE 292M, SMPTE 344M, and SMPTE 259M compliant
■ Supports DVB-ASI at 270 Mbps
■ Cable length indicator for HD-SDI and SD-SDI data rates
■ Maximum cable length adjustment for HD-SDI and SD-SDI
data rates
■ Carrier detect and mute functionality for HD-SDI and SD-SDI
data rates
■ Equalizer bypass mode
■ Seamless connection with HOTLink II™ family
■ Equalizes up to 350m of Canare L-5CFB and Belden 1694A
coaxial cable at 270 Mbps
■ Typically equalizes up to 200m of Canare L-5CFB and Belden
1694A coaxial cable at 1.485 Gbps
■ Low power: 160 mW at 3.3V
■ Single 3.3V supply
■ 16-pin SOIC
■ 0.18 μm CMOS technology
■ Pb-free and RoHS compliant
■ Uses Cypress CLEANLink™ technology
■ Pin compatible to existing equalizer devices
Functional Description
The CYV15G0101EQ is a multi rate adaptive equalizer designed
to equalize and restore signals received over 75Ω coaxial cable.
The equalizer meets SMPTE 292M, SMPTE 344M, and SMPTE
259M data rates. The CYV15G0101EQ is optimized to equalize
up to 350m of Belden 1694A coaxial cable at 270 Mbps and
typically up to 200m of Belden 1694A coaxial cable at 1.485
Gbps. The CYV15G0101EQ connects seamlessly to the
HOTLink II family of transceivers.
The CYV15G0101EQ has DC restoration to compensate for the
DC content of the SMPTE pathological patterns. A cable length
indicator (CLI) provides an indication of the cable length being
equalized at HD-SDI and SD-SDI data rates. The maximum
cable length adjust (MCLADJ) sets the approximate maximum
cable length to equalize at SD and HD data rates. The
CYV15G0101EQ’s differential serial outputs (SDO, SDO) mute
when the approximate cable length set by MCLADJ is reached.
CD/MUTE is a bidirectional pin that provides an indication of the
signal present at the equalizer inputs. It also controls muting the
outputs of the equalizer at HD and SD data rates.
Power consumption is typically 160 mW at 3.3V.
Equalizer System Connection Diagram
HOTLink II
Serializer
Cable
Driver
Serial Links
Copper Cable
Connections
CYV15G0101EQ
Multi Rate
Cable
Equalizer
HOTLink II
Deserializer
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-04184 Rev. *E
• San Jose, CA 95134-1709 • 408-943-2600
Revised October 25, 2007
[+] Feedback