CY7C65213 Datasheet, PDF (1/29 Pages) Cypress Semiconductor – USB-UART LP Bridge Controller

CY7C65213
CY7C65213A
USB-UART LP Bridge Controller
USB-UART LP Bridge Controller
Features
■ USB 2.0 certified, Full-Speed (12 Mbps)
❐ Supports communication driver class (CDC), personal health
care device class (PHDC), and vendor-device class
❐ Battery charger detection (BCD) compliant with USB Battery
Charging Specification Rev. 1.2 (peripheral detect only)
❐ Integrated USB termination resistors
■ Single-channel configurable UART interfaces
❐ Supports 2-pin, 4-pin, 6-pin, 8-pin UART interface
❐ Data rates up to 3 Mbps
❐ 256 bytes for each transmit and receive buffer
❐ Data format:
• 7 or 8 data bits
• 1 or 2 stop bits
• No parity, even, odd, mark, or space parity
❐ Supports parity, overrun, and framing errors
❐ Supports flow control using CTS, RTS, DTR, DSR
❐ Supports UART break signal
❐ CY7C65213 supports single channel RS232/RS422
interfaces whereas CY7C65213A supports
RS232/RS422/RS485 interfaces
■ General-purpose input/output (GPIO): 8 pins
■ Supports unique serial number feature for each device, which
fixes the COM port number permanently when USB-UART LP
Bridge controller device plugs in
■ Configuration utility (Windows) to configure the following:
❐ Vendor ID (VID), Product ID (PID), and Product and
Manufacturer descriptors
❐ UART
❐ Charger detection
❐ GPIO
■ Driver support for VCOM and DLL
❐ Windows 10: 32- and 64-bit versions
❐ Windows 8.1: 32- and 64-bit versions
❐ Windows 8: 32- and 64-bit versions
❐ Windows 7: 32- and 64-bit versions
❐ Windows Vista: 32- and 64-bit versions
❐ Windows XP: 32- and 64-bit versions
❐ Windows CE
❐ Mac OS-X: 10.6, and later versions
❐ Linux: Kernel version 2.6.35 and later versions
❐ Android: Gingerbread and later versions
■ 512-byte flash for storing configuration parameters
■ Clocking: Integrated 48-MHz clock oscillator
■ USB suspend mode for low power
■ Supports bus-/self-powered configurations
■ Compatible with USB 2.0 and USB 3.0 host controllers
■ Operating voltage: 1.71 to 5.50 V
■ Operating temperature:
❐ Commercial: 0 °C to 70 °C
❐ Industrial: –40 °C to 85 °C
■ ESD protection: 2.2-kV HBM
■ RoHS-compliant package
❐ 28-pin SSOP (10 × 7.5 × 1.65 mm, 0.65-mm pitch)
❐ 32-pin QFN (5 × 5 × 1 mm, 0.5-mm pitch)
■ Ordering part number
❐ CY7C65213-28PVXI
❐ CY7C65213-32LTXI
❐ CY7C65213A-28PVXI
❐ CY7C65213A-32LTXI
Applications
■ Blood glucose meter
■ Battery-operated devices
■ USB-to-UART cables
■ Enables USB connectivity in legacy peripherals with UART
■ Point-of-Sale (POS) terminals
■ Industrial and T&M (Test and Measurement) devices
USB Compliant
The USB-UART LP Bridge controller (CY7C65213 and CY7C65213A) is fully compliant with the USB 2.0
specification, USB-IF Test-ID (TID) 40860041.
Table 1. CY7C65213 and CY7C65213-A Features Comparison
Features
RS-485 Support
CY7C65213
No
CY7C65213-A
Yes
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-81011 Rev. *M
• San Jose, CA 95134-1709 • 408-943-2600
Revised August 9, 2016