CY7C1061AV33_12 Datasheet, PDF (1/14 Pages) Cypress Semiconductor – 16-Mbit (1 M × 16) Static RAM

CY7C1061AV33
16-Mbit (1 M × 16) Static RAM
16-Mbit (1 M × 16) Static RAM
Features
■ High speed
❐ t_AA = 10 ns
■ Low active power
❐ 990 mW (max)
■ Operating voltages of 3.3 ± 0.3 V
■ 2.0 V data retention
■ Automatic power down when deselected
■ TTL compatible inputs and outputs
■ Easy memory expansion with CE₁ and CE₂ features
■ Available in Pb-free and non Pb-free 54-pin TSOP II package
and non Pb-free 60-ball fine-pitch ball grid array (FBGA)
package
Functional Description
The CY7C1061AV33 is a high performance CMOS Static RAM
organized as 1,048,576 words by 16 bits.
To write to the device, enable the chip (CE₁ LOW and CE₂ HIGH)
while forcing the Write Enable (WE) input LOW. If Byte Low
Enable (BLE) is LOW, then data from I/O pins (I/O₀ through I/O₇),
is written into the location specified on the address pins (A₀
through A₁₉). If Byte High Enable (BHE) is LOW, then data from
I/O pins (I/O₈ through I/O₁₅) is written into the location specified
on the address pins (A₀ through A₁₉).
To read from the device, enable the chip by taking CE₁ LOW and
CE₂ HIGH while forcing the Output Enable (OE) LOW and the
Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then
data from the memory location specified by the address pins will
appear on I/O₀ to I/O₇. If Byte High Enable (BHE) is LOW, then
data from memory will appear on I/O₈ to I/O₁₅. See Truth Table
on page 8 for a complete description of Read and Write modes.
The input/output pins (I/O₀ through I/O₁₅) are placed in a
high-impedance state when the device is deselected (CE₁
HIGH/CE₂ LOW), the outputs are disabled (OE HIGH), the BHE
and BLE are disabled (BHE, BLE HIGH), or a Write operation is
in progress (CE₁ LOW, CE₂ HIGH, and WE LOW).
Logic Block Diagram
INPUT BUFFER
A₀
A₁
A₂
AA₃₄
A₅
A₆
1M x 16
ARRAY
AAA₇₈₉
I/O₀–I/O₇
I/O₈–I/O₁₅
COLUMN
DECODER
BHE
WE
CE₂
OE
CE₁
BLE
Cypress Semiconductor Corporation • 198 Champion Court
Document #: 38-05256 Rev. *K
• San Jose, CA 95134-1709 • 408-943-2600
Revised April 11, 2011
[+] Feedback