English
Language : 

CY7C1019DV-3310VXI Datasheet, PDF (1/16 Pages) Cypress Semiconductor – 1-Mbit (128 K × 8) Static RAM
CY7C1019DV33
1-Mbit (128 K × 8) Static RAM
1-Mbit (128 K × 8) Static RAM
Features
■ Pin- and function-compatible with CY7C1019CV33
■ High speed
❐ tAA = 10 ns
■ Low Active Power
❐ ICC = 60 mA @ 10 ns
■ Low CMOS Standby Power
❐ ISB2 = 3 mA
■ 2.0 V Data retention
■ Automatic power-down when deselected
■ CMOS for optimum speed/power
■ Center power/ground pinout
■ Easy memory expansion with CE and OE options
■ Available in Pb-free 32-pin 400-Mil wide Molded SOJ, 32-pin
TSOP II and 48-ball VFBGA packages
Functional Description
The CY7C1019DV33 is a high-performance CMOS static RAM
organized as 131,072 words by 8 bits. Easy memory expansion
is provided by an active LOW Chip Enable (CE), an active LOW
Output Enable (OE), and three-state drivers. This device has an
automatic power-down feature that significantly reduces power
consumption when deselected.
Writing to the device is accomplished by taking Chip Enable (CE)
and Write Enable (WE) inputs LOW. Data on the eight I/O pins
(I/O0 through I/O7) is then written into the location specified on
the address pins (A0 through A16).
Reading from the device is accomplished by taking Chip Enable
(CE) and Output Enable (OE) LOW while forcing Write Enable
(WE) HIGH. Under these conditions, the contents of the memory
location specified by the address pins will appear on the I/O pins.
The eight input/output pins (I/O0 through I/O7) are placed in a
high-impedance state when the device is deselected (CE HIGH),
the outputs are disabled (OE HIGH), or during a write operation
(CE LOW, and WE LOW).
The CY7C1019DV33 is available in Pb-free 32-pin 400-Mil wide
Molded SOJ, 32-pin TSOP II and 48-ball VFBGA packages.
Logic Block Diagram
I/O0
INPUTBUFFER
A0
I/O1
A1
A2
I/O2
AAA345
128K × 8
ARRAY
I/O3
AA67
I/O4
A8
I/O5
CE
WE
COLUMN
DECODER
POWER
DOWN
I/O6
OE
I/O7
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 38-05481 Rev. *F
• San Jose, CA 95134-1709 • 408-943-2600
Revised October 20, 2011
[+] Feedback