CY7C1018DV33_10 Datasheet, PDF (1/10 Pages) Cypress Semiconductor – 1-Mbit (128K x 8) Static RAM

Features
• Pin- and function-compatible with CY7C1018CV33
• High speed
— t_AA = 10 ns
• Low Active Power
— I_CC = 60 mA @ 10 ns
• Low CMOS Standby Power
— I_SB2 = 3 mA
• 2.0V Data retention
• Automatic power-down when deselected
• CMOS for optimum speed/power
• Center power/ground pinout
• Easy memory expansion with CE and OE options
• Available in Pb-free 32-pin 300-Mil wide Molded SOJ
Logic Block Diagram
A₀
A₁
A₂
AAA₃₄₅
AA₆₇
A₈
CE
WE
OE
INPUTBUFFER
128K × 8
ARRAY
COLUMN
DECODER
POWER
DOWN
CY7C1018DV33
1-Mbit (128K x 8) Static RAM
Functional Description^[1]
The CY7C1018DV33 is a high-performance CMOS static
RAM organized as 131,072 words by 8 bits. Easy memory
expansion is provided by an active LOW Chip Enable (CE), an
active LOW Output Enable (OE), and tri-state drivers. This
device has an automatic power-down feature that significantly
reduces power consumption when deselected.
Writing to the device is accomplished by taking Chip Enable
(CE) and Write Enable (WE) inputs LOW. Data on the eight I/O
pins (I/O₀ through I/O₇) is then written into the location
specified on the address pins (A₀ through A₁₆).
Reading from the device is accomplished by taking Chip
Enable (CE) and Output Enable (OE) LOW while forcing Write
Enable (WE) HIGH. Under these conditions, the contents of
the memory location specified by the address pins will appear
on the I/O pins.
The eight input/output pins (I/O₀ through I/O₇) are placed in a
high-impedance state when the device is deselected (CE
HIGH), the outputs are disabled (OE HIGH), or during a write
operation (CE LOW, and WE LOW).
The CY7C1018DV33 is available in Pb-free 32-pin 300-Mil
wide Molded SOJ.
Pin Configuration
SOJ
Top View
A₀ 1
32 A₁₆
A_{1 2}
31 A₁₅
A₂ 3
30 _A14
I/O₀
A_{3 4}
CE 5
29 A₁₃
28 _OE
I/O₁
I/O₀ 6
I/O₁ 7
27
26
I/O₇
I/O₆
I/O₂
V_CC 8
V_{SS 9}
25 _VSS
24 _VCC
I/O₃
I/O₂ 10
23 I/O₅
I/O_{3 11}
22 I/O₄
I/O₄
WE 12
21 A12
I/O₅
A_{4 13}
A_{5 14}
20 ^A11
19 ^A10
I/O₆
A_{6 15}
A₇ 16
18 ^A9
17 A₈
I/O₇
Note
1. For guidelines on SRAM system designs, please refer to the ‘System Design Guidelines’ Cypress application note, available on the internet at www.cypress.com.
Cypress Semiconductor Corporation
Document #: 38-05465 Rev. *E
• 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Revised December 8, 2010
[+] Feedback