CY7B9945V_11 Datasheet, PDF (1/15 Pages) Cypress Semiconductor – High Speed Multi-phase PLL Clock Buffer

PRELIMINARY
RoboClock^®
CY7B9945V
High Speed Multi-phase PLL Clock Buffer
Features
■ 500 ps max Total Timing Budget (TTB™) window
■ 24 MHz –200 MHz input and Output Operation
■ Low Output-output skew <200 ps
■ 10 + 1 LVTTL outputs driving 50Ω terminated lines
■ Dedicated feedback output
■ Phase adjustments in 625ps/1300 ps steps up to +10.4 ns
■ 3.3 V LVTTL/LVPECL, Fault Tolerant, and Hot Insertable
Reference Inputs
■ Multiply or Divide Ratios of 1 through 6, 8, 10, and 12
■ Individual Output Bank Disable
■ Output High Impedance Option for Testing Purposes
■ Integrated Phase Locked Loop (PLL) with Lock Indicator
■ Low Cycle-cycle jitter (<100 ps peak-peak)
■ 3.3 V Operation
■ Industrial Temperature Range: –40 °C to +85 °C
■ 52-pin 1.4 mm TQFP package
Functional Description
The CY7B9945V high speed multi-phase PLL clock buffer offers
user selectable control over system clock functions. This multiple
output clock driver provides the system integrator with functions
necessary to optimize the timing of high performance computer
and communication systems.
The device features a guaranteed maximum TTB window speci-
fying all occurrences of output clocks. This includes the input
reference clock across variations in output frequency, supply
voltage, operating temperature, input edge rate, and process.
Ten configurable outputs each drive terminated transmission
lines with impedances as low as 50Ω while delivering minimal
and specified output skews at LVTTL levels. The outputs are
arranged in two banks of four and six outputs. These banks
enable a divide function of 1 to 12, with phase adjustments in 625
ps–1300 ps increments up to ±10.4 ns. The dedicated feedback
output enables divide-by functionality from 1 to 12 and limited
phase adjustments. However, if needed, any one of the ten
outputs can be connected to the feedback input as well as driving
other inputs.
Selectable reference input is a fault tolerant feature that enables
smooth change over to a secondary clock source when the
primary clock source is not in operation. The reference inputs
and feedback inputs are configurable to accommodate both
LVTTL or Differential (LVPECL) inputs. The completely
integrated PLL reduces jitter and simplifies board layout.
Logic Block Diagram
FS
3
REFA+
REFA-
REFB+
REFB-
REFSEL
FBK
MODE
PLL
FBF0
3
FBDS0
3
FBDS1
3
1F0
3
1F1
3
1D S 0
3
1D S 1
3
1F2
3
1F3
3
2F0
3
2F1
3
2DS0
3
2D S 1
3
LO C K
D iv id e
and
Phase
S e le c t
D iv id e
and
Phase
S e le c t
D IS 1
D iv id e
and
Phase
S e le c t
D IS 2
QF
1Q 0
1Q 1
1Q 2
1Q 3
2Q 0
2Q 1
2Q 2
2Q 3
2Q 4
2Q 5
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 38-07336 Rev. *J
• San Jose, CA 95134-1709 • 408-943-2600
Revised March 15, 2011
[+] Feedback