English
Language : 

CY62148E_09 Datasheet, PDF (1/10 Pages) Cypress Semiconductor – 4-Mbit (512K x 8) Static RAM
CY62148E MoBL®
4-Mbit (512K x 8) Static RAM
Features
Functional Description [1]
• Very high speed: 45 ns
• Voltage range: 4.5V–5.5V
• Pin compatible with CY62148B
• Ultra low standby power
— Typical standby current: 1 µA
— Maximum standby current: 7 µA (Industrial)
• Ultra low active power
— Typical active current: 2.0 mA @ f = 1 MHz
• Easy memory expansion with CE, and OE features
• Automatic power down when deselected
• CMOS for optimum speed and power
• Available in Pb-free 32-pin TSOP II and 32-pin SOIC [2]
packages
Product Portfolio
The CY62148E is a high performance CMOS static RAM
organized as 512K words by 8 bits. This device features
advanced circuit design to provide ultra low active current.
This is ideal for providing More Battery Life™ (MoBL®) in
portable applications such as cellular telephones. The device
also has an automatic power down feature that significantly
reduces power consumption when addresses are not toggling.
Placing the device into standby mode reduces power
consumption by more than 99% when deselected (CE HIGH).
The eight input and output pins (IO0 through IO7) are placed
in a high impedance state when:
• Deselected (CE HIGH)
• Outputs are disabled (OE HIGH)
• Write operation is active (CE LOW and WE LOW)
To write to the device, take Chip Enable (CE) and Write Enable
(WE) inputs LOW. Data on the eight IO pins (IO0 through IO7)
is then written into the location specified on the address pins
(A0 through A18).
To read from the device, take Chip Enable (CE) and Output
Enable (OE) LOW while forcing Write Enable (WE) HIGH.
Under these conditions, the contents of the memory location
specified by the address pins appear on the IO pins.
Product
Range
CY62148ELL TSOP II Ind’l
CY62148ELL SOIC Ind’l/Auto-A
VCC Range (V)
Min Typ [3] Max
4.5
5.0
5.5
4.5
5.0
5.5
Power Dissipation
Speed
(ns)
Operating ICC (mA)
f = 1MHz
f = fmax
Standby ISB2 (µA)
Typ [3] Max Typ [3] Max Typ [3] Max
45
2
2.5 15 20
1
7
55
2
2.5 15 20
1
7
Notes
1. For best practice recommendations, refer to the Cypress application note “System Design Guidelines” at http://www.cypress.com.
2. SOIC package is available only in 55 ns speed bin.
3. Typical values are included for reference only and are not guaranteed or tested. Typical values are measured at VCC = VCC(typ), TA = 25°C.
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document #: 38-05442 Rev. *F
Revised March 28, 2007
[+] Feedback