CY62128EV30 Datasheet, PDF (1/11 Pages) Cypress Semiconductor – 1 Mbit (128K x 8) Static RAM

CY62128EV30 MoBL^®
1 Mbit (128K x 8) Static RAM
Features
• Very high speed: 45 ns
• Temperature ranges–
— Industrial: –40°C to +85°C
— Automotive-A: –40°C to +85°C
— Automotive-E: –40°C to +125°C
• Wide voltage range: 2.20V – 3.60V
• Pin compatible with CY62128DV30
• Ultra low standby power
— Typical standby current: 1 µA
— Maximum standby current: 4 µA
• Ultra low active power
— Typical active current: 1.3 mA @ f = 1 MHz
• Easy memory expansion with CE₁, CE₂ and OE features
• Automatic power down when deselected
• CMOS for optimum speed and power
• Offered in Pb-free 32-pin SOIC, 32-pin TSOP I, and 32-pin
STSOP packages
Logic Block Diagram
Functional Description^[1]
The CY62128EV30 is a high performance CMOS static RAM
module organized as 128K words by 8 bits. This device
features advanced circuit design to provide ultra low active
current. This is ideal for providing More Battery Life™ (MoBL^®)
in portable applications such as cellular telephones. The
device also has an automatic power down feature that signifi-
cantly reduces power consumption when addresses are not
toggling. Placing the device into standby mode reduces power
consumption by more than 99% when deselected (CE₁ HIGH
or CE₂ LOW). The eight input and output pins (IO₀ through
IO₇) are placed in a high impedance state when the device is
deselected (CE₁ HIGH or CE₂ LOW), the outputs are disabled
(OE HIGH), or a write operation is in progress (CE₁ LOW and
CE₂ HIGH and WE LOW).
To write to the device, take Chip Enable (CE₁ LOW and CE₂
HIGH) and Write Enable (WE) inputs LOW. Data on the eight
IO pins is then written into the location specified on the
Address pin (A₀ through A₁₆).
To read from the device, take Chip Enable (CE₁ LOW and CE₂
HIGH) and Output Enable (OE) LOW while forcing Write
Enable (WE) HIGH. Under these conditions, the contents of
the memory location specified by the address pins appear on
the IO pins.
INPUT BUFFER
IO0
A0
A1
IO1
A2
A3
IO2
A4
A5
128K x 8
IO3
A6
A7
ARRAY
IO4
A8
A9
IO5
A10
A11
IO6
CE1
CE2
WE
COLUMN DECODER
POWER
DOWN
IO7
OE
Note
1. For best practice recommendations, refer to the Cypress application note “System Design Guidelines” at http://www.cypress.com.
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document #: 38-05579 Rev. *C
Revised May 07, 2007
[+] Feedback