CY3672 Datasheet, PDF (1/6 Pages) Cypress Semiconductor – PTG Programming Kit

CY3672
PTG Programming Kit
Features
• Supports Field-programmable Clock Generators
• CY2077FS, CY2077FZ, CY22050F, CY22150F,
CY22381F, CY22392F, CY22393F, CY22394F,
CY22395F, CY25100F, CY25200F, CY25701F,CY25702F
CY23FP12, CY26049, and CY27EE16
• Allows quick and easy prototyping
• Compact design for ease of portability
• Easy to use Microsoft^® Windows^® 95, 98, NT, 2K, ME,
XP-compatible interface
• User-friendly CyberClocks™ or CyberClocks Online
software for JEDEC file development
CY3672-PRG Kit Contents
• Parallel port cable
• AC/DC adapter
• Quick start guide
• User manual
CY3672-FTG Development Kit Contents in
Addition to CY3672-PRG Contents
• Three Sockets: CY3695, CY3698, CY3699
CY3672-USB Kit Contents in Addition to
CY3672-PRG Contents
• USB Driver CD ROM
• USB Cable
C y C lo c k s R T
Functional Description
The CY3672 programming kit enables any user with a PC to
quickly and easily program Field-programmable Clock Gener-
ators. The only set-up requirements are a power connection
and either a parallel port or USB port (CY3672-USB)
connection with the PC, as shown in Figure 2.
Using CyClocksRT™, (embedded in CyberClocks software) or
CyberClocks Online, users can configure their parts to a given
specification and generate the corresponding JEDEC file. In
addition, CyClocksRT software provides PPM optimization
and power calculations.
The JEDEC file is then loaded into CY3672 software that
communicates with the programmer. The CY3672 software
has the ability to read and view the EPROM table from a
programmed device. The programming flow is outlined in
Figure 1.
Set Up
Hardware
The CY3672 programming kit has a very simple set-up
procedure. As shown in Figure 2, only two connections are
required. The programmer must be connected to a PC through
either a parallel port or USB port (CY3672-USB) and must
receive power through the AC/DC adapter that gets hooked up
to your standard 110V/220V wall outlet. When using the
parallel port, make sure the parallel port settings on your
computer is ECP or EPP. CY3672-PRG or CY3672-USB are
the programming base unit that can be ordered separately with
any individual socket adapter.
CyberClocks Online
Jedec
F ile
CY3672 Software
Program m er
CY3672
A d a p ter
B it
Stream
Figure 1. Programming Procedure
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document #: 38-07409 Rev. *F
Revised October 31, 2005