CY3670 Datasheet, PDF (1/4 Pages) Cypress Semiconductor – FTG Programming Kit

CY3670
FTG Programming Kit
Features
Functional Description
■ Supports multiple Cypress EPROM Field Programmable Clock
Generators: CY2071AF, CY2291F, CY2292F (SOIC only),
CY2907F8, and CY2907F14
■ Separate device specific socket adapters
■ Allows quick and easy prototyping
■ Compact design for portability
■ Easy to use interface: Microsoft^® Windows^®
■ User friendly CyberClocks™ software for JEDEC file
development
Kit Contents
■ Programmer Unit
■ Serial Port Cable
■ AC/DC Adapter
■ CD containing: CyClocks Software, CY_FTG_V2 Programmer
Software, and data sheets for supported devices
■ Socket adapters are required and are available separately
The CY3670 FTG Programming Kit enables users with a PC to
program Cypress EPROM Field-Programmable Clock
Generators quickly and easily. The two setup requirements are
a power connection and a serial port connection with the PC, as
shown in Figure 1.
Using CyberClocks™ software, users can configure their parts to
the required specifications and generate the corresponding
JEDEC file, which is used for programming.
In addition, CyberClocks software provides PPM optimization
and power calculations.
The JEDEC file is loaded into the CY_FTG_V2 software that
communicates with the programmer. The CY_FTG_V2 software
also has blank-check capabilities and the ability to read, verify,
and view the EPROM table from a programmed device. This
procedure is shown in Figure 1.
Figure 1. Programming Procedure
CyberClocks (CyClocks)
CY_FTG_V2
JEDEC
File
Device Specific Adapter
Bit Stream through RS232 Serial Port
Cypress FTG Programmer - CY3670
Programs: CY2071AF/CY2291F/CY2292F/
CY2907F8/CY2907F14
ON
Busy
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 38-07410 Rev. *A
• San Jose, CA 95134-1709 • 408-943-2600
Revised January 14, 2008
[+] Feedback