CY3600I Datasheet, PDF (1/3 Pages) Cypress Semiconductor – FLASH370i™ ISR™ Programming Kit

0i
CY3600i
FLASH370i™ ISR™ Programming Kit
Features
• Supports FLASH370i™ and Ultra37000™ devices (for
Ultra37000V 3.3V support, please see the Ultra37000
ISR™ Programming Kit data sheet, CY3700i)
• Jam programming language support for Ultra37000
devices
• Standard JTAG programming interface
• Multi-device programming
• Supports cascading of devices
• Easy to use Windows 95™, Windows 98™, and
Windows NT™ 4.0 compatible interface
• Eliminates programming insertion to improve
manufacturing efficiency
• For programming in the lab, on the manufacturing floor,
or at remote sites
• ATE support via Jam on industry leading ATE platforms
Kit Contents
• ISR (In-System Reprogrammable™) Programming
Cable for use with FLASH370i and Ultra37000 devices
• ISR Programming Software Release 2.2
• ISR Application Notes
Functional Description
The ISR programming kit enables users to program FLASH370i
and Ultra37000 CPLDs on board with our ISR Programming
Kit, ISR programming cable, and a personal computer. The
ISR programming cable connects to the parallel port of a PC
into a standard 10-pin male connector mounted on the user’s
board.
ISR Programming Software
The ISR software provides an easy to use Graphical User
Interface that accepts JEDEC files as input. The JEDEC files
are used in ISR programming for FLASH370i CPLDs.
JEDEC files are also used to compose platform and device
independent Jam files. Jam files are used in ISR programming
for Ultra37000 CPLDs.
The ISR software reads in a simple user-defined configuration
file that dictates how many devices are in the daisy chain and
what operation is to be done on each Cypress device. The
same chain can be used with other JTAG compliant devices.
The ISR User’s Guide (in the CD-ROM documentation)
describes the operation of the ISR software. The application
notes included with the kit describe the Ultra37000 and
FLASH370i architectures and system design considerations for
programming with the FLASH370i ISR Programming Kit.
10-pin ISR Connector
The diagram below shows the pinout of the 10-pin male
connector to be mounted onto the board.
The view looking down onto the board is shown below.
SDO
VCC
ISR^[1]
ISRVPP GND^[2]
GND
NC
SDI
SCLK SMODE
ISR PC Cable Programming
V _CC
Ultra 37000
device
6’
1’
Interface Box
25-pin
cable
PC
Parallel Port
F LASH370i
device
Designer’s Board
10 Pin ISR connector
Notes:
1. Refer to the CD-ROM ISR User’s Guide documentation for detailed information on ISR programming and electrical specification requirements.
2. Pin1 Connection.
Cypress Semiconductor Corporation • 3901 North First Street • San Jose • CA 95134 • 408-943-2600
Document #: 38-03041 Rev. **
Revised August 24, 2001