CY2XF23FLXCT Datasheet, PDF (1/11 Pages) Cypress Semiconductor – 6-Pin Ceramic LCC SMD - Tape and Reel

PRELIMINARY
CY2XF23
High Performance LVDS Oscillator with
Frequency Margining - I²C Control
Features
■ Low Jitter Crystal Oscillator (XO)
■ Less than 1ps Typical RMS Phase Jitter
■ Differential LVDS Output
■ Output Frequency from 50 MHz to 690 MHz
■ Frequency Margining through I²C Bus
■ Factory Configured or Field Programmable
■ Integrated Phase-Locked Loop (PLL)
■ Pb-Free Package: 5.0 x 3.2 mm LCC
■ Supply Voltage: 3.3V or 2.5V
■ Commercial and Industrial Temperature Ranges
Functional Description
The CY2XF23 is a high performance and high frequency Crystal
Oscillator (XO). It uses a Cypress proprietary low noise PLL to
synthesize the frequency from an integrated crystal. The output
frequency can be changed using the I²C Bus serial interface,
allowing easy frequency margin testing in applications.
The CY2XF23 is available as a factory configured device or as
a field programmable device.
Logic Block Diagram
1
SDA
2
SCL
Pinouts
CRYSTAL
OSCILLATOR
I²C
INTERFACE
LOW-NOISE
PLL
PROGRAMMABLE
CONFIGURATION
OUTPUT
DIVIDER
Figure 1. Pin Diagram - 6 Pin Ceramic LCC
SDA 1
SCLK 2
VSS 3
6 VDD
5 CLK#
4 CLK
4
CLK
5
CLK#
Table 1. Pin Definitions - 6 Pin Ceramic LCC
Pin
1
2
4, 5
6
3
Name
SDA
SCLK
CLK, CLK#
VDD
VSS
I/O Type
I/O
CMOS Input
LVDS Output
Power
Power
I²C Serial Data
I²C Serial Clock
Differential Output Clock
Supply Voltage: 2.5V or 3.3V
Ground
Description
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-53145 Rev. *A
• San Jose, CA 95134-1709 • 408-943-2600
Revised June 15, 2009
[+] Feedback