SSF67V Datasheet, PDF (1/1 Pages) Cynergy3 Co – continuous output level transducer

SSF67V
TM
continuous output level transducer
This transducer will give an output of 4-20mA
over a measuring span of up to 2500mm. The
output changes from 4 mA at low level to 20
mA at high level.
The transducer is top mounting, via a
screwed entry, has a brass or stainless steel
shaft and either a stainless steel or foamed
float, and is normally installed from outside
the tank. Volt free reed switches and resistors
are mounted in the stem, to provide a varying
resistance, as the float rises or falls, which
is then converted into a 4 to 20mA stepped
output.
USA
Cynergy3 Components
2320 Paseo de las Americas, Suite 104
San Diego, CA 92154
Sales & Tech Support [phone]
Email: [e-mail]
EUROPE - UK
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Fax [phone]
Email:[e-mail]
4-20mA transducer for safe area use
Maximum process temperature 100°C
Maximum span 2500mm
Standard 10mm stepped accuracy
Standard screw entry G1.0” to G2.5”
Mechanical
IP 65 enclosure in die cast Aluminium Alloy, hard anodised or polyester finish, with Nitrile O-ring and M20x1.5
conduit entry.
Stem assembly in Brass or Stainless Steel, fully silver soldered or TIG welded construction
Screwed entry mounting G1.0” to G2.5”
Float can be constructed in either Stainless Steel 316L, High temperature plastic foam or D300 closed cell PVC
Maximum Process Temperature 100°C
Maximum Ambient Temperature 70°C
Minimum high level 70mm
Maximum measurement span 2500mm
Standard 10mm stepped accuracy
Electrical
Output 4 to 20mA. 4 mA can be either High or Low
Input supply required is 15 to 30 Vdc
Can be connected to analogue or digital displays
Standards and Approvals
This design is tested to and meets the following standards:
DEFSTAN 59-41 Iss.4 :1992
BS1597 : 1995
2&3 EN50081-1 :1992
EN50082-1 : 1992
Standard Parts
Upper Level
Measuring Span
Screw Entry
SSF67V70S500
70mm
500mm
G1”
SSF67V70S1000
70mm
1000mm
G1”
SSF67V70S1500
70mm
1500mm
G1”
Mechanical Dimensions
All dimensions are in millimeters (inches)
70mm
70mm
(2.75”)
(2.75”)
15mm
(0.6”)
1mm
(0.04”)
Min High Level
70mm
(2.75”)
Max Span 2500mm (9.8”)
VIEW A
Float Material
D300 PVC Foam
D300 PVC Foam
D300 PVC Foam
70mm
(2.75”)
MEDER
VIEW A _{M20 x 1.5} 14mm
(0.6”)
HEXAGON AF 47mm
G1.0"
20mm
(0.8”)
30mm
(1.2”)
ISO9001CERTIFIED
Competitive part number cross-reference available at: www.cynergy3.com
© 2007 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp.