SH-5 Datasheet, PDF (1/1 Pages) Cynergy3 Co – ANSI 150RF Flange mount SPDT switch

SH-5 series
ANSI 150RF Flange mount SPDT switch
1 ½”, 2” & 3” x ANSI 150RF Flange mount
SS 316L float material
SS 304 other wetted parts material
Available in direct switching version for use at up
to 100ºC or low power switching at up to 200ºC
Aluminium enclosure with screw on lid and cable gland
Technical Specification
The SH-5 series are ANSI 150RF flange
mount float operated level switches.
This design uses a pivoted float arm with a
magnet on the inboard end. This magnet
when moved by the rising float arm
interacts with another magnet in the
switch enclosure to give a snap action
operation.
Two switching options are available using
either microswitches or reed switches, for
different switching power and operating
temperature ranges.
There are also two float sizes available of
either 150x50mm or 150x41mm.
Mounting style
Float material
Maximum Temperature
Maximum pressure
Float SG
Minimum fluid SG
External via flange
316L grade SS
100ºC / 200ºC
10 bar
0.55 or 0.65
0.60 or 0.70
Flange size
Flange rating
Other wetted parts
Cable entry
Enclosure rating
Sealing gasket
1 ½”, 2” & 3”
150lb
SS 304
½”BSP
IP65
Not supplied
Electrical Specification
Contact Form
Switching Voltage AC Max V
Switching Voltage DC Max V
Switching Current Max A
SH-5052/SH-5051
SPDT
250
120
5
SH-5052RH/SH-5151RH
SPDT
400
400
1
All ratings are for resistive load only. RH version should be limited to maximum power 60VA
Standard Parts
SH-5052
SH-5052RH
SH-5151
SH-5151RH
SH-5653
SH-5653RH
Material
SS 316L/304
SS 316L/304
SS 316L/304
SS 316L/304
SS 316L/304
SS 316L/304
Max Current Temperature Range Min SG
5
0 - 100ºC
0.60
1
0 - 200ºC
0.60
5
0 - 100ºC
0.70
1
0 - 200ºC
0.70
5
0- 100ºC
0.40
1
0 - 200ºC
0.40
Mount
1 ½”
1 ½”
2”
2”
3”
3”
Mechanical Dimensions in mm
Other flange types and pressure ratings may be possible. Please contact Cynergy3 with your requirements.
SH-5052
250
150
17.5 _{70 (112 for RH)}
Ø41
1-1/2” 150lb flange
Ø75 _Ø127
14
½”BSP
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
SH-5151
250
150
19.1 _{70 (112 for RH)}
Ø50
Ø75
Ø152
14
2” 150lb flange
230
½”BSP
23.9 ₇₀
120
Ø75
Ø75
Ø190
14
3" 150lb flange
½”BSP
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.