S2UL Datasheet, PDF (1/1 Pages) Cynergy3 Co – UL Approved Axial Style Reed Relay

S2(UL) Series
UL Approved* Axial Style Reed Relay
Variable mounting options
10W, 50W and 100VA contact options
Reliable reed switch contacts
The S2(UL) reed relay series from Cynergy3
has been developed and approved by UL
for applications where PCB mounting is
not possible.
The relay can be mounted in a variety of
methods and orientations to suit particular
applications. The leadout wires are
flexible enough to allow bending for
assembly into equipment.
Available with either a 10W or 50W contact
in a pressurised reed switch or a 100VA
contact in an evacuated reed switch.
Please refer to this document for circuit
design notes:-
http://www.cynergy3.com/blog/application
-notes-reed-relays-0
*Consult factory for UL ratings
Contact Specification
Material
Switch atmosphere
Isolation across contacts
Switching power max.
Switching power max.
Switching voltage DC max.
Switching voltage AC max.
Switching current DC max.
Switching current AC max.
Carry current max.
Contact capacitance max.
Initial contact resistance
max.
Insulation resistance
Life time operations
Conditions
Units
Resistive load
Resistive load
Resistive load
Resistive load
Resistive load
Resistive load
Open
@Nominal
coil voltage
Hot switching
resistive load
Dry switching
Volts DC
Watts
VA
Volts DC
Volts AC RMS
mA DC
mA AC RMS
Amps DC/AC
RMS
Pico Farad (pF)
Milliohms (mΩ)
Ohms (Ω)
Operations 50%
duty cycle
Operations 50%
duty cycle
S2-03P
Ruthenium
Pressurised
200
10
-
200
140
250
250
1
0.3
100
10E10
10E7
(12V DC, 4mA)
10E8
S2-XXP
Rhodium
Pressurised
500
50
70
350
300
700
500
S2-XXE
Rhodium
Vacuum
1000
-
100
350
300
1000
1000
2.5
2.5
0.5
0.5
100
100
10E10
10E6
(350V DC, 1mA)
10E10
10E7
(500V DC, 1mA)
10E9
Coil Specification
3V
Must operate voltage
@20°C
Volts DC
2.25
Must release voltage
@20°C
Volts DC
0.5
Operate time inc bounce
@20°C
Milliseconds
0.1
Release time inc bounce
@20°C
Milliseconds
0.07
Resistance
@20°C
Ohms
250
5V
12V
24V
3.7
9
19
1
2
3
1.0
1
11
0.5
0.5
0.5
160
1000
1000
Relay Specification
Isolation contact /coil min.
Insulation resistance
contact to coil
Operating temp range
Storage temp range
500V DC, 60
sec, 20°C
±5°C, 45% Rh
Volts DC
Ohms
°C
°C
1000
T.B.C.
-40 to +85
-40 to +125
Standard Parts
S2-03PU
S2-05PU
S2-12PU
S2-24PU
S2-05EU
S2-12EU
S2-24EU
Coil Volts VDC
3
5
12
24
5
12
24
Switching Power
10W
70VA
70VA
70VA
100VA
100VA
100VA
Isolation VDC
200
500
500
500
1000
1000
1000
Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements.
Switch Atmosphere
Pressurised
Pressurised
Pressurised
Pressurised
Vacuum
Vacuum
Vacuum
Mechanical Dimensions
2.0 ^4.0
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
ISO9001 C E R T I F I E D
www.cynergy3.com
S2(UL) Series 2016
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.