LM10AW Datasheet, PDF (1/2 Pages) Cynergy3 Co – High Density Polyethylene

LM WRAS Approved Series
This is suitable for use in water, industrial wastewater and sewage, that can have
wide variations of temperature. This small design of switch is for use in more confined
spaces, where there is not enough room for the larger FFSMC type.
The rounded body design and floating attitude prevents accumulation of solids on
the body. The switch has additional internal ballast, to bring the centre of gravity and
rotation close to the cable entry point.
The switching element is a self cleaning type, that makes the complete switch
insensitive to humidity and condensation, allowing this type to operate in widely
fluctuating temperatures. The switch contacts are rated at 10 Amp resistive.
Supplied, as standard, with 5 metres cable and adjustable counterweight.
Technical Specifications
Contact Form
Material
Temp Range
°C
°F
Cable (standard length 5m)
Standard cable covering
Max. working pressure
Electrical Specifications
Power Rating
Max
Switching Voltage Max
Switching Current Max. Resistive
Switching Current Max. Inductive
LM10AW
LM10BW
LM10CW
N/O
N/C
C/O
High Density Polyethylene
0 / +55 (WRAS approved up to +23°C)
+ 32 / +131
With protective earth
no earth
WRC Approved
10 bar
AC : 750 VA DC : 180W
AC : 250 V DC : 110 V
10 A
AC : 4A DC : 1 A
It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not
purely resistive.
47
15°
Off - On
Differential
On - Off
15°
129
Minimum Cable Pivot
length 120mm
75
• For smaller tanks and
restricted space
• Use in sewer and
industrial waste
water
• Shape avoids
“ragging”, in sewer
systems
• Unaffected by
suspended solids
• Operates in Turbulent
Fluids
Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: [phone]
[e-mail]
ISO 9001C ER TI FIED
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.