LITTLE-EX-5 Datasheet, PDF (1/1 Pages) Cynergy3 Co – High Density Polyethylene

LITTLE-EX Series
This series is for use in hazardous areas. This is suitable for use in water,
industrial wastewater and sewage, that can have wide variations of temperature.
The rounded body design and floating attitude prevents accumulation of solids on
the body. The switch has additional internal ballast, to bring the centre of gravity
and rotation close to the cable entry point.
The switching element is a self cleaning type, that makes the complete switch
insensitive to humidity and condensation, allowing this type to operate in widely
fluctuating temperatures.
Supplied, as standard, with either 5,10 or 20 metres of cable (counter weight
available as an optional accessory).
Certified for use in hazardous areas as below.
ATEX
II 1 G Ex ia IIC T6
Technical Specifications
LITTLE-EX-5
LITTLE-EX-10 LITTLE-EX-20
Contact Form
C/O
Material
High Density Polyethylene
Temp Range
°C
0 / +55
°F
+ 32 / +131
Cable (standard lengths)
5 metre 10 metre
20 metre
Cable colour
Blue - Polyurethane
Max. working pressure
10 bar
Electrical Specifications
Switching Voltage Max
9.6V
Switching Current Max. Resistive
21.4mA
It is necessary to use an Exia barrier with these switches
MECHANICAL
Counter weights are available as optional accessories, part number CW1
15°
Off - On
Differential
On - Off
15°
47
129
Minimum Cable Pivot
length 120mm
75
For smaller tanks and
restricted space
Use in sewer and
industrial waste water
Shape avoids “ragging” in
sewer systems
Unaffected by suspended
solids
Operates in turbulent
fluids.
Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: [phone]
[e-mail]
ISO 9001 C ERTI FIED
LITTLE-EX 2015
www.cynergy3.com
© 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.