IPSUAT Datasheet, PDF (1/2 Pages) Cynergy3 Co – Intrinsically Safe Pressure Transducer

IPSUAT Series
Intrinsically Safe Pressure Transducer
Approvals:-
ATEX / IECEx
EII Ex ia IIC T4 Ga Ta (see schedule)
Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy <±0.25% FS BFSL
Pressure ranges from vacuum to 5800psi
The IPSUAT series is ideally suited for use in a wide range of industrial applications in hazardous
areas. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within
a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially industrial applications.
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration certificate.
Electrical Protection
Supply reverse polarity
Electromagnetic compatibility
Mechanical Stability
Shock
Vibration
Environment & Thermal Effects
Operating Temperature
Storage temperature
Compensated temperature range
Thermal Zero Shift (TZS)
Thermal Span Shift
Permissible environment zone 0
Performance
No damage but also no function Accuracy (Non-Linearity & Hysteresis) <±0.25% / FS (BFSL)
CE Compliant
Setting Errors (offsets)
Zero & Full Scale, <±0.5% / FS
100g / 11s
10g RMS (20 - 2000Hz)
Material Specifications
Housing
“O” ring seals
316 Stainless Steel
Viton
-20ºC to +120ºC
-40ºC to +110ºC
+20ºC to +80ºC
<±0.04% /FS/ºC
<±0.015% /ºC
-20ºC to +60ºC
with patm 0.8 to 1.1 bar
Diaphragm
Media wetted parts
Weight
Installation position
Operational Life
Insulation resistance
Ceramic Al₂O₃ 96%
Housing & connection, “O” ring seal,
diaphragm
Approx 100g
Any
> 100x 10⁶ cycles
> 50MOhms at 50Vdc
Pressure Ranges
Nominal Pressure, Gauge, psi
Compound range
psi
Permissible Overpressure psi
Burst Pressure
psi
15 30 75 150 300 750 1500
-15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360
30 60 150 300 600 1500 3000
60 75 180 375 750 1800 3750
3750 6000
6000 9750
7500 9750
Output Signal and Supply Voltage
Wire system
Output
2-wire
4-20mA
Supply Voltage
10-28Vdc
Connection Pin Nos
+ve Supply Pin 1 -ve Supply Pin 2
Ground Earth Pin
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
ISO9001C E R T I F I E D
www.cynergy3.com
IPSUAT 2016
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.