IPSU Datasheet, PDF (1/2 Pages) Cynergy3 Co – Industrial Pressure Transducer - Ceramic

IPSU Series
Industrial Pressure Transducer - Ceramic
Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy <±0.25% FS BFSL
Various outputs including mV, Volts and mA.
Pressure ranges from vacuum to +5800psi
(Custom ranges available on request)
The IPSU series is suitable for use in a wide range of industrial applications. The probe uses a
piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially for industrial applications.
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration certificate.
Electrical Protection
Supply reverse polarity
Electromagnetic compatibility
No damage/no function
CE Compliant
Mechanical Stability
Shock
Vibration
Temperatures & Thermal Effects
Media Temperature
Ambient Temperature
Storage temperature
Compensated temperature range
Thermal Zero Shift (TZS)
Thermal Span Shift
100g / 11s
10g RMS (20 - 2000Hz)
-40ºC to +135ºC
-20ºC to +80ºC
-40ºC to +125ºC
+20ºC to +80ºC
<±0.04% /FS/ºC
<±0.015% /ºC
Performance
Accuracy (Non-Linearity & Hysteresis) <±0.25% / FS (BFSL)
Setting Errors (offsets)
2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
4-wire Zero & Full Scale, <±0.5% / FS
@ 10 Volts
Material Specifications
Housing
303 Stainless Steel
“O” ring seals
Viton
Diaphragm
Media wetted parts
Ceramic Al₂O₃ 96%
Housing & connection, “O” ring seal,
Weight
Installation position
Operational Life
Insulation resistance
diaphragm
Approx 3.5oz (100g)
Any
> 100x 10⁶ cycles
> 50MOhms at 50Vdc
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, psi
15 30 75 150 300 750 1500
Compound range
psi -15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360
Permissible Overpressure psi
30 60 150 300 600 1500 3000
Burst Pressure
psi
60 75 180 375 750 1800 3750
3750 6000
6000 9750
7500 9750
Output Signals and Supply Voltages
Wire system
Output
2-wire
4-20mA
3-wire
0-5Vdc
Supply Voltage
9-32Vdc
9-32Vdc
4-wire (amplified) 10mV/V (ratiometric) 3-12Vdc
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
Connection Pin Nos
+ve Supply Pin 1
+ve Supply Pin 1
+ve Output Pin 3
+ve Supply Pin 1
+ve Output Pin 3
-ve Supply Pin 2
-ve Supply Pin 2
Ground Earth Pin
-ve Supply Pin 2
-ve Output Earth Pin
Ground Earth Pin
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.