IPSS Datasheet, PDF (1/2 Pages) Cynergy3 Co – Semi-Flush Mount Pressure Transmitter

IPSS series
Semi-Flush Mount Pressure Transmitter
Piezo-resistive sensor, Ceramic or Silicon
Accuracy <±0.25% FS BFSL
Various outputs including Volts and mA.
Pressure ranges from 100mbar to 100 bar
Pressure reference, Gauge or Absolute
The semi-flush mount pressure
transmitter, IPSS, has a piezo-resistive
silicon or ceramic pressure sensor. The
sensor is semi-flush to the housing
making this product ideal for viscous or
paste like media. The sensor and housing
are made from stainless steel with a
choice of internal ‘O’ ring seals to ensure
the product is suitable for a wide range of
applications.
The electronics incorporate a
microprocessor-based amplifier, requiring
no adjusting and giving stable electronics
- especially in high vibration or shock
applications.
Every device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration certificate.
Suitable applications
Environmental engineering
Static tank level
Viscous and paste-like media
Composite manufacturing
Process control
Performance
Accuracy (Non-Linearity & Hysteresis)
Setting Errors (offsets)
2-wire
3-wire
Permissible Load
2-wire
Influence Effects
3-wire
Supply
Load
Mechanical Dimensions
Automotive testing
Process pumping
Sewage or grey water
Injection moulding or infusion
Aggressive media
<±0.25% / FS (BFSL)
Zero & Full Scale, <±0.5% / FS
Zero & Full Scale, <±0.5% / FS
R_max = [(VS-VSmin)/0.02]W
R_min = 10kW
<0.005% FS / 1V
0.05% FSO / kW
M12 4-pin connector
Material Specifications
Housing
“O” ring seals
Diaphragm
Media wetted parts
Miscellaneous
Current consumption
Weight
Installation position
Operational Life
Insulation resistance
303 Stainless Steel
Viton
316L Stainless Steel or Ceramic
Housing & process connection, “O” ring
seal, diaphragm
2 -wire - limits at 28mA
3-wire - typical 6mA
Approx 100g
Any, small zero shift when tilted through 90º
for silicon
> 100 x 10⁶ cycles
> 50MOhms at 50Vdc
G 3/4” BSP Male
Electrical Protection
Supply reverse polarity
No damage but also no function
Electromagnetic compatibility CE Compliant
Mechanical Stability
Shock
100g / 11s
Vibration
10g RMS (20 - 2000Hz)
Temperatures & Thermal Effects
Media Temperature
-40ºC to +125ºC
Ambient Temperature
-20ºC to +80ºC
Storage temperature
-40ºC to +125ºC
Compensated temperature
+20ºC to +80ºC
Thermal Zero Shift (TZS)
<±0.04% /FS/ºC
Thermal Span Shift (TSS)
<-0.015% /ºC
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.