IPSL Datasheet, PDF (1/2 Pages) Cynergy3 Co – Low Range Industrial Pressure Sensor

IPSL series
Low Range Industrial Pressure Sensor
Piezo-resistive sensor
Stainless steel body & diaphragm
Accuracy <±0.25% FS BFSL
Various outputs including Volts and mA.
Pressure ranges from 50 mbar to 1000 mbar
Gauge or Absolute pressure reference
The IPSL is suitable for use in a wide range
of applications. The probe uses a piezo-
resistive silicon sensor, giving excellent
media compatibility within an oil filled
316L stainless steel housing
The electronics incorporate a
microprocessor based amplifier, requiring
no adjusting and giving stable electronics,
especially in high vibration/shock
applications.
Each device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration certificate.
There is a choice of internal O ring seals to
ensure that the device is compatible with a
wide range of media.
Custom versions can be made for
particular applications.
Options available on the IPSL pressure transmitter.
Pressure range
Pressure reference (G or Abs)
Output type
Suitable applications
HVAC
Pneumatics
Rainwater harvesting
Agricultural machinery
Laboratory testing
Mechanical engineering
Environmental engineering
Automotive testing
Tank gauging
IBC, IBC Tote or pallet tank
Performance
Accuracy (Non-Linearity & Hysteresis)<±0.25% / FS (BFSL) for gauge, <±0.5% for Absolute
Setting Errors (offsets)
Permissible Load
Influence Effects
2-wire
3-wire
2-wire
3-wire
Supply
Load
Zero & Full Scale, <±0.5% / FS
Zero & Full Scale, <±0.5% / FS
R_max = [(Supply-9min)/0.02]W
R_min = 10kW
<0.005% FS / 1V
0.05% FSO / kW
Material Specifications
Housing
“O” ring seals
Diaphragm
Media wetted parts
diaphragm
Miscellaneous
Current consumption
Weight
Installation position
90º
Operational Life
Insulation resistance
303 Stainless Steel
Viton
316L Stainless Steel
Housing & connection, “O” ring seal,
2 -wire Limits at 28mA
3-wire Typical 6mA
Approx 100g
Any, small zero shift when tilted through
> 100x 10⁶ cycles
> 50MOhms at 50Vdc
Electrical Protection
Supply reverse polarity
No damage/no function
Electromagnetic compatibility CE Compliant
Mechanical Stability
Shock
100g / 11s
Vibration
10g RMS (20 - 2000Hz)
Temperatures & Thermal Effects
Media Temperature
-40ºC to +125ºC
Ambient Temperature
-20ºC to +80ºC
Storage temperature
-40ºC to +125ºC
Compensated temperature range
+20ºC to +80ºC
Thermal Zero Shift (TZS) <±0.04% /FS/ºC
Thermal Span Shift
<-0.015% /ºC
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
ISO9001 C E R T I F I E D
www.cynergy3.com
Email:[e-mail]
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.