IPS Datasheet, PDF (1/2 Pages) Cynergy3 Co – Industrial Pressure Transducer - Ceramic

IPS Series
Industrial Pressure Transducer - Ceramic
Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy <±0.25% FS BFSL
Various outputs including mV, Volts and mA.
Pressure ranges from -1 to 400 bar
The IPS series is suitable for use in a wide range of industrial applications. The probe uses a piezo-
resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially industrial applications..
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration certificate.
Electrical Protection
Supply reverse polarity
Electromagnetic compatibility
No damage/no function
CE Compliant
Mechanical Stability
Shock
Vibration
Temperatures & Thermal Effects
Operating Temperature
Ambient Temperature
Storage temperature
Compensated temperature range
Thermal Zero Shift (TZS)
Thermal Span Shift
100g / 11s
10g RMS (20 - 2000Hz)
-20ºC to +135ºC
-20ºC to +80ºC
-20ºC to +125ºC
+20ºC to +80ºC
<±0.04% /FS/ºC
<±0.015% /ºC
Performance
Accuracy (Non-Linearity & Hysteresis) <±0.25% / FS (BFSL)
Setting Errors (offsets)
2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
4-wire Zero & Full Scale, <±0.5% / FS
@ 10 Volts
Material Specifications
Housing
Stainless Steel
“O” ring seals
Viton
Diaphragm
Media wetted parts
Ceramic Al₂O₃ 96%
Housing & connection, “O” ring seal,
diaphragm
Weight
Installation position
Operational Life
Insulation resistance
Approx 100g
Any
> 100x 10⁶ cycles
> 50MOhms at 50Vdc
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, bar
1
Compound range
bar -1 to 0
Permissible Overpressure bar
2
Burst Pressure
bar
4
2
-1 to 2
4
5
5
-1 to 5
10
12
10
-1 to 9
20
25
20 50
-1 to 19 -1 to 24
40 100
50 120
Output Signals and Supply Voltages
Wire system
Output
2-wire
4-20mA
3-wire
0-5Vdc
Supply Voltage
9-32Vdc
9-32Vdc
4-wire (amplified) 10mV/V (ratiometric) 3-12Vdc
Connection Pin Nos
+ve Supply Pin 1
+ve Supply Pin 1
+ve Output Pin 3
+ve Supply Pin 1
+ve Output Pin 3
100
250 400
200
400 650
250
500 650
-ve Supply Pin 2
-ve Supply Pin 2
Ground Earth Pin
-ve Supply Pin 2
-ve Output Earth Pin
Ground Earth Pin
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.