ILLS Datasheet, PDF (1/2 Pages) Cynergy3 Co – Submersible Tank Gauging Level Transmitter

ILLS series
Submersible Tank Gauging Level Transmitter
Piezo-resistive sensor
Stainless steel housing and diaphragm
Accuracy <0.5% FS BFSL
Various outputs including Volts and mA.
Pressure ranges from 1mWG to 10mWG
Options available on the IMTG transmitter.
Pressure range
Voltage or current output
Cable length
The ILLS is designed for use in continuous
submersion in liquids such as water, oils
and fuels in small tanks, where
conventional mechanical level switches
and sensors are not ideal and more level
‘control’ and measurement is required.
The probe uses a piezo-resistive silicon
sensing technology, isolated from the
media by a diaphragm within the stainless
steel housing It offers excellent stability,
repeatability and resolution for
applications where a small tank level is
required, from as low as 1m through to 10
m high tanks.
Suitable applications
Static tank level
Container or chamber level
Vehicle tank level
IBC, IBC Tote or Pallet Tank
Rainwater harvesting
Performance
Accuracy (Non-Linearity & Hysteresis) <±0.5% / FS (BFSL)
Setting Errors (offsets)
2-wire
Zero & Full Scale, <±0.5% / FS
3-wire
Zero & Full Scale, <±0.5% / FS
Permissible Load
Influence Effects
2-wire
3-wire
Supply
Load
R_max = [(Supply-9min)/0.02]W
R_min = 10kW
<0.005% FS / 1V
0.05% FSO / kW
Each device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration certificate.
Custom versions can be made for particular applications.
Electrical Protection
Supply reverse polarity
No damage/no function
Electromagnetic compatibility CE Compliant
Mechanical Stability
Shock
Vibration
100g / 11s
10g RMS (20 - 2000Hz)
Temperatures & Thermal Effects
Media Temperature
-20ºC (Non-freezing) to +60ºC
Storage temperature
-20ºC to +70ºC
Compensated temperature range 20ºC±25ºC
Thermal Zero Shift (TZS) <±0.04% /FS/ºC
Thermal Span Shift (TSS) <±0.015% /ºC
Material Specifications
Housing
“O” ring seals
Diaphragm
Cable sheath material
Media wetted parts
sheath
Weight
Installation position
90º
Operational life
Insulation resistance
303 Stainless Steel
Viton
316L Stainless Steel
FEP standard
Housing, “O” ring seal, diaphragm, cable
Transmitter: approx 75g
Cable: 48g per metre
Any, small zero shift when tilted through
> 100x 10⁶ cycles
50MW@50Vdc
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
www.cynergy3.com
ISO9001 C E R T I F I E D
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.