FSP10 Datasheet, PDF (1/2 Pages) Cynergy3 Co – Flow switch for direct switching of pump

FSP10
Flow switch for direct switching of pump
The FSP10 is designed for directly
controlling an electric pump that is
providing increased pressure or flow within
water systems that are gravity fed from
storage tanks. The device has to be fitted
in the pipe above the pump.
Direct switching of pumps up to 4A inductive
0.6 l/min or 3.0 l/min turn on flow rate
Automatic shut down on flow stop
Supply and pump electrical connections terminated
within case with cable glands at entry
1”BSP pipe connections
Technical Specification
Flow Tube Material
Enclosure material
Enclosure rating
Start up flow rate
Max flow rate
Max Pressure
Max Temperature
Pipe connections
Electrical Specification
Supply Voltage
Switching Voltage Max
Switching Power Max
Switching Current Max
FSP10A06
Q. min
l/min
0.6
Q max
l/min
P max
bar
T max
°C
BSP
Vac
250
Vac
250
kW
1
A
10 for resistive load
4A for motor load
Brass
Polyamide
IP54
80
8
85
1”
Standard Parts
FSP10A06
FSP10A30
On flow rate Max Power
0.6l/min
750
3.0 l/min
750
Max Pump current
4A
4A
90
The FSP10 starts up the pump when the
flow rate through the device exceeds 0.6
l/min, so giving an increased flow and
82
pressure, dependant on the pump capacity.
A flow of less than 0.6 l/min , or 3.0 l/min
depending on version, whether due to a
lack of supply (e.g. tank empty) or to a
decrease in demand(e.g. tap closing), will
turn the pump off again.
FSP10A30
3.0
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.