FCNM Datasheet, PDF (1/2 Pages) Cynergy3 Co – Fluid Level switches

FCNM Series
Fluid Level switches
The switch is based on a simple principle of a float located inside an enclosed
chamber, which follows the level of the liquid in the system. When the liquid level
rises, the float magnet attracts and operates a 20A 250Vac microswitch with N/O and
N/C contacts.
Suitable for use in water or liquids of SG equal to or greater than 1.
cyn er gy_{componen ts}
SPECIFICATION
Material:
Switching voltage max.
Switching current max. resistive
Max working pressure
Pipe connections:
Temperature Range
Must Close Level (S.G.=1)
Must Open Level (S.G.=1)
Housing : Brass
Float : Polypropylene
250Vac
20A
8 bar
Fluid input 1/4" BSP/GAS
Air vent 3-4mm flexible
0/55°C +32/+131°F
14mm
32mm
must close
level
220 _{must open}
level
12 3
electric cable
cable retainer
cable - entry
1/4 BSP
56
60
• Level control in pipes
• Prevention of Dry-
running of centrifugal
pumps
• Level control in tanks
• Level control in
pressurised
containers
(autoclaves)
Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: [phone]
[e-mail]
ISO 9001C ER TI FIED
www.cynergy3.com
© 2013 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
FCNM 2013