DAT71210F Datasheet, PDF (1/2 Pages) Cynergy3 Co – High Voltage relays 10kV & 15kV

D Series
High Voltage relays 10kV & 15kV
10kV or 15kV Isolation
Low Contact Resistance
PCB or Panel Mount
HV connections via Flying Leads, Solder Turret
(wire wrap), or 1/4” Spade Terminals
Excellent AC characteristics
Very high isolation voltages, up to 15kV,
are achieved through the use of high
vacuum reed switches with either Rhodium
or Tungsten contacts and make these
relays suitable for high reliability
applications, such as cardiac
defibrillators, test equipment and high
voltage power supplies.
The Rhodium contact relays have low
contact resistance, while the Tungsten
contact relays can switch higher voltages.
PCB or Panel Mount, via Nylon studs,
versions are available.
Contact Specification Unit Condition
10kV SPNO
10kV SPNC
15kV SPNO
Contact Material
Isolation across contacts kV DC or AC peak
Switching Power Max. W
Switching Voltage Max. V DC or AC peak
Switching Current Max. A DC or AC peak
Carry Current Max A DC or AC peak
Capacitance across pF coil to screen
contacts
grounded
Lifetime operations dry switching
50W switching
Contact Resistance mW max (typical)
Insulation Resistance Wmin (typical)
Coil Specification
Rhodium Tunsten
10
10
50
50
1000 7000
3
2
4
3
<0.2 <0.2
Rhodium Tungsten
10 10
50 50
1000 7000
3
2
4
3
<0.2 <0.2
10⁹
10⁹
10⁹
10⁹
10⁶
10⁶
10⁶
10⁶
50 (15) 250(100) 50 (15) 250(100)
10¹⁰ (10¹³)
10¹⁰ (10¹³)
5V 12V 24V 5V 12V 24V
Tungsten
15
50
10000
2
2
<0.2
10⁹
10⁶
250 (100)
10¹⁰ (10¹³)
5V 12V 24V
Must Operate Voltage
Must Release Voltage
Operate Time
Release Time
Resistance
Relay Specification
V DC
V DC
ms diode fitted
ms diode fitted
W
3.7 9 20 3.7 9 20 3.7 9 20
0.5 1.25 4 0.5 1.25 4 0.5 1.25 4
3.0 3.0 3.0 2.0 2.0 2.0 3.0 3.0 3.0
2.0 2.0 2.0 3.0 3.0 3.0 2.0 2.0 2.0
28 150 780 38 240 925 16 95 350
Isolation contact/coil kV
Insulation resistance contact
to all terminals
Wmin (typical)
Envirnonmental
Operating Temp range ºC
17
10¹⁰ (10¹³)
-20 to +70
17
10¹⁰ (10¹³)
-20 to +70
17
10¹⁰ (10¹³)
-20 to +70
Please refer to this document for circuit design notes:-
http://www.cynergy3.com/blog/application-notes-reed-relays-0
Connection options, for the HV, include
PCB, solder turret(wire wrap), flying lead
and 0.25” spade terminals.
Part Numbering System
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
Reed Switch Size
Contact Form A=n/o, B=n/c
Contact Material
R=Rhodium,
T=Tungsten
Moulding Ref. No.
Coil Voltage
05=5Vdc, 12=12Vdc,
24=24Vdc
Isolation between
Contacts
10=10kV, 15=15kV
D A T 7 12 10
F
Mounting or Connection Style
No suffix indicates PCB mount
F=PCB mount & coil connection with
Flying lead HV connection
P=Panel mount with wire wrap
terminals
S=PCB mount & coil connection with
stud fixing & 1/4” spade HV
connection (not available on 15kV
models)
T=PCB mount & coil connection with
stud fixing & wire wrap HV
connection
ISO9001C E R T I F I E D
D 2016
www.cynergy3.com
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.