D200 Datasheet, PDF (1/1 Pages) MicroPower Direct, LLC – Single & Dual Output Miniature, 2W SIP DC/DC Converters

D200 Series
High Power 200W reed relay with 7kV isolation
200W switching power
7kV Isolation across contacts
Low Contact Resistance
PCB Mount
Excellent AC characteristics
The D200 series combines a high power
200W switching capacity with isolation of
7kV across the contacts.
This switching performance is achieved
through the use of high vacuum reed
switches with Tungsten contacts and make
these relays suitable for high reliability
applications, such as test equipment and
high voltage power supplies.
These are PCB Mount relays, though
custom options may be available on
request.
Contact Specification Unit Condition
Switch Action
Contact Material
Isolation across contacts kV DC or AC peak
Switching Power Max. W resistive
Switching Voltage Max. V DC or AC peak
Switching Current Max. A DC or AC peak
Carry Current Max
A DC or AC peak
Capacitance across pF coil to screen
contacts
grounded
Lifetime operations dry switching
50W switching
Contact Resistance mW max (typical)
Insulation Resistance W min (typical)
Coil Specification
5V
SPNO
Tungsten
7
200
2500
3
5
0.8 typ
10⁹
10⁶
600
(10¹³)
12V 24V
Must Operate Voltage
Must Release Voltage
Operate Time
Release Time
Resistance
Relay Specification
V DC
V DC
ms diode fitted
ms diode fitted
W
3.75 9 20
0.5 1.25 4
6.0 6.0 6.0
1.0 1.0 1.0
28 150 780
Isolation contact/coil kV
Insulation resistance contact
to all terminals
W min (typical)
Envirnonmental
Operating Temp range ºC
Standard Parts
DAT200-05
DAT200-12
DAT200-24
17
10¹⁰ (10¹³)
20 to +70
Coil Voltage Vdc
5
12
24
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
Mechanical Dimensions
60.0
(2.36")
15.8
(0.62")
18.5
(0.73")
4.0
(0.15") 4 Pins 0.635(0.025”) Square
5.1
3
1
4
(0.2")
2
10.2
(0.4")
25.4
(1.0")
50.8
(2.0")
CIRCUIT DIAGRAM
FORM A (NO)
3
1
2
4
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.