CBC-EVAL-05B Datasheet, PDF (1/7 Pages) Cymbet Corporation – EnerChip CC Evaluation Kit

CBC-EVAL-05B
EnerChip CC Evaluation Kit
EnerChip™ CC CBC3105, CBC3112 & CBC3150 Eval Kit
Overview
The EnerChip™ CC EVAL-05B Evaluation Kit is
used to demonstrate the capabilities of EnerChip
Solid State Batteries and the EnerChip CC with
Integrated Battery Management capabilities. The kit
can be used to demonstrate: 1 ) EnerChip battery
standalone , 2) either EnerChip CC device or 3 ) the
EnerChip CC in parallel with the another EnerChip
battery.
Figure 1: EnerChip CC Block Diagram
EnerChip CC Applications
• Standby supply for non-volatile SRAM, real-time
clocks, controllers, supply supervisors, and other
system-critical components.
• Wireless sensors and RFID tags and other
powered, low duty cycle applications.
• Localized power source to keep microcontrollers
and other devices alert in standby mode.
• Power bridging to provide back-up power to
system during exchange of main batteries.
• Consumer appliances that have real-time
clocks; provides switchover power from main
supply to backup battery.
• Business and industrial systems such as:
network routers, point-of-sale terminals, single-
board computers, test equipment, multi-function
printers, industrial controllers, and utility meters
• Energy Harvesting by coupling the EnerChip
with energy transducers such as solar panels.
Figure 2: EVAL-05B Boards - CBC3150/CBC3112 board on
left and the CBC3105-EVAL-05 board on the right
CBC-EVAL-05B EVAL Kit
The EnerChip CC is the world’s first smart
rechargeable Solid State Battery. It is an integrated
solution that provides battery backup and power
management for systems requiring power backup
and/or rechargeable energy storage. A single
EnerChip CC can charge up to 10 additional
EnerChips connected in parallel.
There are 2 boards in the EVAL-05B kit as shown in
Figure 2 above: The first board has a CBC3112 and
a CBC3150. This evaluation board utilizes a 24-
pin DIP format. The second board has a CBC3105.
The CBC3105-EVAL-05 evaluation board utilizes
a 16-pin DIP format. Both boards have standard
0.6 inch pin width with 100mil center pin spacing.
Either EVAL-05B board can be inserted into a
solderless breadboard or 24-pin socket for easy
experimentation.
During normal operation, the EnerChip CC charges
itself with a controlled voltage using an internal
charge pump that operates from 2.5V to 5.5V. An
ENABLE pin allows the designer to activate and
deactivate the charge pump using an external control
line in order to minimize current consumption and
take advantage of the fast recharge time of the
EnerChip. A power fail detect indication is available
via RESET pin.
The CBC3105, CBC3112 and CBC3150 data sheets
contain complete specifications and application
circuits for each EnerChip CC device.
©2013 Cymbet Corporation • Tel: [phone] • www.cymbet.com
DS-72-26 Rev B
Page 1 of 7