CWR-170-10-0021 Datasheet, PDF (1/4 Pages) CW Industries – Card Edge Connectors

Card Edge Connectors
The card edge connector provides a fast means for
connecting/disconnecting single, double-sided or multi-
layer printed circuit boards.
Contact force consistency is obtained through the use
of a long cantilevered contact having a minimum
deflection angle and an extended self-cleaning, wiping
action. These contacts ensure positive connection to the
board, even when pad surfaces are irregular.
Good contact pressure is maintained with minimum
wear on PC board pads, even in hostile environments,
and after numerous insertions and withdrawals or shock
and vibration.
• Insulator protects contacts
from possible damage when
mated with PC board.
• Sturdy cover posts
provide protection
against cable pulls of
25 lb or more.
• Polarizing key slots allow
positive polarization without
loss of a contact position.
• Contact and cover
design provides for
reuse. Connector can
be reterminated easily
and reliably to a new
section of cable.
• Patented Torq-Tite™ contact
keeps conductor under constant
tension. Assures a mechanically
and electrically, sound, gas-tight
connection.
• Recessed slot
provide means for
non-destructive
removal of cover.
26
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: [phone] • Fax: [phone] • www.cwind.com