CWR-141-10-0000 Datasheet, PDF (1/4 Pages) CW Industries – PCB Connectors

PCB Connectors
The PCB connector is used when a permanent connection of flat cable to the PC board is required.
The cable is terminated to the PCB connector making a reliable gas-tight connection with CW’s
patented Torq-Tite™ contacts. The connector’s pins are then soldered to the board.
CW’s PCB connectors are approved by the U.S. Defense Department and are qualified to
Mil-DTL-83503/23.
• Built-in strain relief
is available to protect
contacts if cable is pulled.
• Available with or without
protective cover lip for
cable end or daisy chain
applications.
• No “bare shoulders”.
No exposure of unnecessary
sections of the contact and
possible shorting at the PC
board interface.
• Patented Torq-Tite™ contact
keeps conductor under constant
tension. Assures a mechanically
and electrically sound, gas-tight
connection.
• Sturdy, yet flexible solder posts,
able to withstand bending
and straightening.
34
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: [phone] • Fax: [phone] • www.cwind.com