PQA30-D Datasheet, PDF (3/7 Pages) CUI INC – DC-DC CONVERTER

For more information, please visit the product page.
CUI Inc │ SERIES: PQA30-D │ DESCRIPTION: DC-DC CONVERTER
date 07/08/2014 │ page 3 of 7
SAFETY AND COMPLIANCE
parameter
conditions/description
min
typ
max
units
isolation voltage
input to output for 1 minute at 1 mA max.
1,500
Vdc
isolation resistance
input to output at 500 Vdc
1,000
MΩ
EMI/EMC
CE¹
conducted emissions
CISPR22/EN55022 class A (no circuit required); class B (external circuit required, see Figure 1-b)
radiated emissions
CISPR22/EN55022 class A (no circuit required); class B (external circuit required, see Figure 1-b)
ESD
IEC/EN61000-4-2 class B, contact ± 4kV
radiated immunity
IEC/EN61000-4-3 class A, 10V/m
EFT/burst
IEC/EN61000-4-4 class B, ± 2kV (external circuit required, see Figure 1-a)
surge
IEC/EN61000-4-5 class B, ± 2kV (external circuit required, see Figure 1-a)
conducted immunity
IEC/EN61000-4-6 class A, 3 Vr.m.s
voltage dips & interruptions
IEC/EN61000-4-29 class B, 0%-70%
MTBF
as per MIL-HDBK-217F @ 25°C
1,000,000
hours
RoHS
2011/65/EU
Note
1. CE mark is only on models without heatsink.
ENVIRONMENTAL
parameter
operating temperature
storage temperature
storage humidity
case temperature
vibration
conditions/description
see derating curves
non-condensing
at full load, operating temperature curve range
10~55Hz, 30 min. along x, y, and z axis
min
-40
-55
5
typ
max
units
85
°C
125
°C
95
%
105
°C
10
G
SOLDERABILITY
parameter
hand soldering
wave soldering
conditions/description
1.5 mm from case for 10 seconds
see wave soldering profile
min
typ
max
units
300
°C
260
°C
Peak Temp. 260°C Max.
250
Wave Soldering Time
4 Sec. Max.
200
10 Sec. Max.
150
MECHANICAL
parameter
dimensions
case material
weight
100
50
0
Time (sec.)
conditions/description
min
typ
max
units
board mount: 50.80 x 25.40 x 11.80
mm
board mount with heatsink: 50.80 x 25.40 x 16.30
mm
aluminum alloy
board mount
board mount with heatsink
22
g
35
g
cui.com