PDQ15-Q24-S3-D Datasheet, PDF (3/9 Pages) CUI INC – DC-DC CONVERTER

For more information, please visit the product page.
CUI Inc │ SERIES: PDQ15-D │ DESCRIPTION: DC-DC CONVERTER
date 07/12/2016 │ page 3 of 9
PROTECTIONS
parameter
over voltage protection
over current protection
short circuit protection
conditions/description
zener or TVS clamp
3.3 Vdc output models
5 Vdc output models (single and dual)
12 Vdc output models (single and dual)
15 Vdc output models (single and dual)
hiccup mode
continuous, automatic recovery
SAFETY AND COMPLIANCE
parameter
conditions/description
isolation voltage
input to output for 1 minute
isolation resistance
input to output
isolation capacitance
input to output
conducted emissions
EN 55022 Class A (external circuit required, see
Figure 3)
MTBF
as per MIL-HDBK-217F, GB, full load, 25°C
3.3, 5 Vdc output models
all other models
RoHS
2011/65/EU
ENVIRONMENTAL
parameter
operating temperature
storage temperature
operating humidity
conditions/description
see derating curves
non-condensing
SOLDERABILITY
parameter
wave soldering
conditions/description
see wave soldering profile
min
typ
max
3.9
6.2
15
18
110
140
160
min
1,500
1,000
typ
1,000
max
950,000
1,300,000
min
typ
max
-40
105
-55
125
95
min
typ
max
260
units
Vdc
Vdc
Vdc
Vdc
%
units
Vdc
MΩ
pF
hours
hours
units
°C
°C
%
units
°C
Notes:
1. Soldering materials: Sn/Cu/Ni
2. Ramp up rate during preheat: 1.4°C/s (from 50°C to 100°C)
3. Soaking temperature: 0.5°C/s (from 100°C to 130°C), 60±20 seconds
4. Peak temperature: 260°C, above 250°C for 3~6 seconds
5. Ramp down rate during cooling: -10°C/s (from 260°C to 150°C)
Time (Seconds)
cui.com