PDQ10-Q24-S3-D Datasheet, PDF (3/9 Pages) CUI INC – DC-DC CONVERTER

For more information, please visit the product page.
CUI Inc │ SERIES: PDQ10-D │ DESCRIPTION: DC-DC CONVERTER
date 07/12/2016 │ page 3 of 9
PROTECTIONS
parameter
over voltage protection
over current protection
short circuit protection
conditions/description
zener or TVS clamp
3.3 Vdc output models
5 Vdc output models (single and dual)
12 Vdc output models (single and dual)
15 Vdc output models (single and dual)
continuous, automatic recovery
SAFETY AND COMPLIANCE
parameter
conditions/description
isolation voltage
input to output for 1 minute
isolation resistance
input to output
isolation capacitance
input to output
conducted emissions
EN 55022 Class A & Class B (external circuit
required, see Figure 3)
MTBF
as per MIL-HDBK-217F, GB
RoHS
2011/65/EU
ENVIRONMENTAL
parameter
operating temperature
storage temperature
operating humidity
conditions/description
see derating curves
non-condensing
SOLDERABILITY
parameter
wave soldering
conditions/description
see wave soldering profile
min
typ
max
units
3.9
Vdc
6.2
Vdc
15
Vdc
18
Vdc
120
%
min
1,500
1,000
typ
1,000
max
units
Vdc
MΩ
pF
1,300,000
hours
min
typ
max
units
-40
105
°C
-55
125
°C
95
%
min
typ
max
units
260
°C
Notes:
1. Soldering materials: Sn/Cu/Ni
2. Ramp up rate during preheat: 1.4°C/s (from 50°C to 100°C)
3. Soaking temperature: 0.5°C/s (from 100°C to 130°C), 60±20 seconds
4. Peak temperature: 260°C, above 250°C for 3~6 seconds
5. Ramp down rate during cooling: -10°C/s (from 260°C to 150°C)
Time (Seconds)
cui.com