CPE-165 Datasheet, PDF (3/5 Pages) CUI INC – piezo audio transducer

PART NUMBER: CPE-165
page 3 of 5
date 11/12/2007
DESCRIPTION: piezo audio transducer
MECHANICAL CHARACTERISTICS
item
test condition
evaluation standard
solderability
Stripped wires are immersed in rosin for
90% min. of the lead terminals
5 seconds and then immersed in solder bath will be wet with solder
of 270 ±5°C for 3 ±1 seconds.
(except the edge of the terminal).
soldering heat resistance
Stripped wires are immersed up to 1.5mm from
buzzer’s body in solder bath of 300 ±5°C for No interference in operation.
3 ±0.5 seconds or 260 ±5°C for 10 ±1 seconds.
lead wire pull strength
The pull force shall be applied to lead wire:
Horizontal
3.0N
No damage or cutting off.
Vertical
2.0N
vibration
The buzzer shall be measured after applying
a vibration amplitude of 1.5 mm with 10 to
The value of oscillation
55 Hz band of vibration frequency to each of frequency/current consumption
the 3 perpendicular directions for 2 hours.
should be ±10% of the initial
drop test
The part will be dropped from a height of
measurements. The SPL should
75 cm onto a 40 mm thick wooden board 3
be within ±10dB compared with
times in 3 axes (X, Y, Z) for a total of 9 drops. the initial measurement.
bottom covering pull force
The pull force of 3.0N shall be applied to
No damage or cutting off.
bottom covering on the vertical direction.
ENVIRONMENT TEST
item
high temp. test
low temp. test
humidity test
temp. cycle test
test condition
After being placed in a chamber at +95°C for
240 hours.
After being placed in a chamber at -40°C for
240 hours.
After being placed in a chamber at +40°C and
90±5% relative humidity for 240 hours.
The part shall be subjected to 5 cycles. One
cycle will consist of:
+95
+25
+25
-40
evaluation standard
The buzzer will be measured after
being placed at +25°C for 4
hours. The value of the
oscillation frequency/current
consumption should be ±10%
compared to the initial
measurements. The SPL should
be within ±10dB compared to the
initial measurements.
0.5hr 0.5hr 0.25 0.5hr 0.5hr 0.5hr 0.25
3hours
20050 SW 112^th Ave. Tualatin, Oregon 97062 phone [phone] fax [phone]