PJ-070BH-SMT Datasheet, PDF (2/2 Pages) CUI INC – DC POWER JACK

CUI Inc │ MODEL: PJ-070BH-SMT │ DESCRIPTION: DC POWER JACK
date 06/19/2012 │ page 2 of 2
MECHANICAL DRAWING
units: mm[inches]
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
center pin
terminal 1
terminal 2
terminal 3
plastic
MATERIAL
brass
brass
copper alloy
brass
PA6T
PLATING
nickel
silver
silver
silver
4.50 0.177
9.0 0.354
6.30 0.248
10.9 0.429
6.50 0.256
14.27 0.562
0.2
5.0 0.197
4.2 0.165
13.2 0.520
3.50 0.138
14.1 0.555
(TYP)
2.00 0.079
(2 PLCS)
4.50 0.177
(2 PLCS)
10.6 0.417
4.55 0.179
3
4.8 0.189
1.25 0.049
0.2
8.35 0.329
0.3
1
3.10 0.122
4.0 0.157
8.9 0.350
0.3 (2 PLCS)
2
2.50 0.098
(2 PLCS)
4.50 0.177
(3 PLCS)
1
2
4.5 0.177
(2 PLCS)
3
4.9 0.193
(2 PLCS)
1.25 0.049
PCB LAYOUT
TOP VIEW
4.8 0.189
REVISION HISTORY
MATING PLUG
Jack Insertion Depth: 8.9mm
Schematic
Model
PJ-070BH-SMT
1
3
2
Center Pin
ø2.5 mm
rev.
1.0
1.01
description
date
initial release
03/16/2012
updated features
06/15/2012
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax [phone]
cui.com
[e-mail]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.