VPF-S200-XXRI Datasheet, PDF (1/5 Pages) CUI INC – switching power supply

PART NUMBER: VPF-S200-XXRI series
features
·power factor correction
·power good signal
·short circuit protection
·over load, voltage, temperature protection
·approved to UL/cUL, TUV, CE with CB
scheme
·N+1 parallel redundancy
·extended temperature range: -40 ~ +75°C
available
page ^{1 of 5}
date ^11/19/2007
DESCRIPTION: switching power supply
MODEL
VPF-S200-03RI
VPF-S200-05RI
VPF-S200-12RI
VPF-S200-24RI
VPF-S200-36RI
VPF-S200-48RI
notes:
output^{1, 2, 3}
(V)
3-4V
5-6V
12 - 18 V
24 - 30 V
32 - 46 V
48 - 56 V
preset
voltage
(V)
3.3 V
5V
12 V
24V
36 V
48 V
max. output⁴
power / current (A)
with force air
convection
30 A
22 A
200W
22 A
200W
150W
200W
150W
200W
150W
200W
150W
regulation⁵
±1%
±1%
±1%
±1%
±1%
±1%
ripple & noise^{5, 6}
(Vp-p)
±1%
±1%
±1%
±1%
±1%
±1%
1. customer must specify output voltage on PO
2. output is fully isolated
3. output voltage is measured at output power connector
4. maximum 200 W with 18. cfm forced ventilation
5. 1% minimum load is required to maintain the ripple and regulation
6. ripple and noise are measured from 10 KHz to 20 MHz at output terminals with a 0.1 µF ceramic capacitor and a 22 µF capacitor in parallel.
20050 SW 112^th Ave. Tualatin, Oregon 97062 phone [phone] fax [phone]