VF-S150 Datasheet, PDF (1/5 Pages) CUI INC – Switching Power Supply

1/5
VF-S150 Series Switching Power Supply
Rev. 12-2006
Features
· AC input range auto-selectable
· Power factor correction
· Remote on/off
· Power good signal
· Short circuit protection
· Over load protection
· Over voltage protection
· Over temperature protection
· Providing Peak Power 600W within
500uS duty
· Approved to UL, CUL, TUV, CE with CB
scheme
· High power density: 6.25watts.cu in.
· Extended temperature range: -40 ~ +75 ºC
available
E222889
Model
VF-S150-03A-CF
VF-S150-05A-CF
VF-S150-12A-CF
VF-S150-18A-CF
VF-S150-24A-CF
VF-S150-48A-CF
Preset
Voltage
3.3V
5V
12V
18V
24V
48V
Output^{1, 2, 3}
3-4V
5-6V
12 - 16 V
17 - 23 V
24 - 30 V
36 - 56 V
Output Current
Minimum Maximum
0A
30 A
0A
30 A
0A
12.5 A
0A
8.82 A
0A
6.25 A
0A
4.28 A
Max. Power⁴
120 W
150 W
150 W
150 W
150 W
150 W
Ripple & Noise ^{5, 6}
Regulation⁵ (Vpp)
+/- 1%
50 mV
+/- 1%
50 mV
+/- 1%
1%
+/- 1%
1%
+/- 1%
1%
+/- 1%
1%
Notes:
1 Customer must specify output voltage on PO.
2 Output is fully isolated.
3 Output voltage is measured at output power connector.
4 Provides peak power of 600 W within 500 µS for all models. For longer duty duration please contact us.
5 1% minimum load is required to maintain the ripple and regulation.
6 Ripple and noise is measured from 10 KHz to 20 MHz at output terminals with a 0.1 µF ceramic capacitor and
a 22 µF electrolytic capacitor in parallel.
V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062
www.v-infinity.com
1-866-372-1258