MES3-P Datasheet, PDF (1/4 Pages) CUI INC – INCREMENTAL ENCODER

SERIES: MES3-XXXPXXX
date 10/2009
page 1 of 4
DESCRIPTION: INCREMENTAL ENCODER
ELECTRONIC SPECIFICATIONS
output waveform
output signals
output voltage
current consumption
output phase difference
supply voltage
output capacity
output resolution (ppr)
frequency response
waveform rise/fall time
* Requires I/F interface module (page 4)
MECHANICAL SPECIFICATIONS
max. shaft load
radial;
axial;
starting torque
max. rotational speed
shock resistance
vibration proof
cable
weight
ENVIRONMENTAL SPECIFICATIONS
operating temp
storage temp
humidity
square wave
A, B, Z phase (voltage output, open collector)
A, B, Z, A, B, Z phase (line driver)
VOL ≤ 0.3 V
VOH ≥ VCC ~ 0.3 V
≤ 15 mA
A,B phase difference: T/4 ± T/8, Z phase width: T ± 0.5T
3.2 V dc ±5% (open collector)
5 V dc - 5% ~ 12 V dc + 10% (voltage output, open collector)*
5 V dc ±5% (line driver)*
20 mA max.
64, 100
100 kHz max.
≤ 2 μs (output cable 300 mm or less)
0.98 N (100 gf)
0.98 N (100 gf)
5 x 10-4 N∙m (5 gf∙cm)
6000 rpm
500 m/s² (50 G), 3 times each on XYZ
1.5 mm ,55 Hz, 2 hours each on XYZ
flexible, 130 mm
5 g (with cable)
0° to +60° C
-20° to +80° C
30~95% no condensation
PART NUMBER KEY
MES3 - XXX P XXX
Output Resolution:
64 = 64 ppr
100 = 100 ppr
Output Options:
P = 3.2 V Open Collector without I/F box
P3 = Option 5 ~ 12 V Voltage Output with I/F box
PC3 = Option 5 ~ 12 V Open Collector with I/F box
PE = Option 5 V Line Driver with I/F box
20050 SW 112^th Ave. Tualatin, Oregon 97062 phone [phone] fax [phone] www.cui.com