CZT01 Datasheet, PDF (1/4 Pages) CUI INC – incremental encoder

PART NUMBER: CZT01
rev.
page 1 of 4
date 7/2008
DESCRIPTION: incremental encoder
ELECTRICAL SPECIFICATIONS
current consumption
supply voltage
supply current
output resolution (ppr)
contact resistance
insulation resistance
dielectric strength
100mA or less (under no load)
10 V dc
1 mA
12
500mΩ max.
50MΩ min.
50 V ac (50 ~ 60 Hz, cut-off current 2 mA) is applied between
non-connected terminals and between terminals and the metal frame for
60 ±5 seconds
MECHANICAL SPECIFICATIONS
detent points
shaft play in axial direction
rotational torque
rotational life
mounting height
mechanical strength
12 detent points each (detent angle: 30° ±3°)
0.3 mm max.
14 ~ 40 gf·cm
100000 cycles (at 3~30 cycles per minute with 0.5 mA, 5 V dc load)
7 ± 0.1mm
free from mechanical abnormalities after test (testing detailed in figure 1)
ENVIRONMENTAL SPECIFICATIONS
operating temp
-25° to +85° C
humidity
≤85% RH
vibration proof
10 ~ 55 Hz / 1.5mm 2h each X, Y, Z
FIGURE 1
Mount the product to the P.C.B. and apply a static force of 10 gf·cm minimum. Contact resistance: 5Ω max., Insulation
resistance: 10 MΩ min.
20050 SW 112^th Ave. Tualatin, Oregon 97062 phone [phone] fax [phone]