403C35D24M00000 Datasheet, PDF (3/3 Pages) CTS Corporation – Surface Mount Quartz Crystal

TAPE AND REEL INFORMATION
DIMENSIONS IN MILLIMETERS
4.0
4.0
Ø1.50
1.75
1.25
3.50
8.0
3.0
DIRECTION OF FEED
Model 403
3.2x2.5mm Low Cost
Surface Mount Crystal
17.5
Ø13
120°
2.0
Ø60 Ø178
Ø23
Device quantity is 3,000 pieces minimum per 178mm reel.
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle:
400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1
minute transfer time between temperatures.
Mechanical Shock:
1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3
mutually perpendicular planes (18 total shocks).
Sinusoidal Vibration:
0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles
each in 3 mutually perpendicular planes (9 times total).
Gross Leak:
Fine Leak:
No leak shall appear while immersed in an FC40 or equivalent liquid at
+125°C for 20 seconds.
Mass spectrometer leak rates less than 2x10^-8 ATM cc/sec air equivalent.
Resistance to Solder Heat:
Product must survive 3 reflows of +260°C peak, 10 seconds maximum.
High Temperature Operating Bias:
2,000 hours at +125°C, disregarding frequency shift.
Frequency Aging:
1,000 hours at +85°C, maximum ±5 ppm shift.
Insulation Resistance:
Moisture Sensitivity Level:
500M Ohms @ 100V_DC ±15V_DC.
Level 1 per JEDEC J-STD-020.
QUALITY AND RELIABILITY
Quality systems meet or exceed the requirements of ISO 9000:2000 standards.
Document No. 008-0288-0
Page 3 - 3
Ù  Ù  Ù  CTS Electronic Components, Inc. Ù  171 Covington Drive Ù  Bloomingdale, IL 60108 Ù  Ù  Ù 
Rev. F