ATXN6040D Datasheet, PDF (2/2 Pages) CTS Corporation – Crystal

Post Environmental Performance:
Mechanical Shock:
@ a half sine pulse shock of 0.3 milliseconds
duration and a peak level of 8700 g's
Model: ATXN6040D
Crystal
∆ Fs < +/- 2.0 PPM
∆ Rs < +/- 3 Ω or 10%
Vibration:
Per 2 x EIA RS-152-B
∆ Fs < +/- 2.0 PPM
∆ Rs < +/- 3 Ω or 10%
Thermal Shock:
Air to air @ -40°C to 85°C, 30 min. at each
temperature with less than 20 sec. transition
time for 32 cycles. Allow crystals to stabilize a
minimum of 4 hours prior to re-test.
∆ Fs < +/- 2.0 PPM
∆ Rs < +/- 3 Ω or 10%
Mechanical Dimensions (mm):
THIS DATA SHEET IS NOT AN OFFER FOR SALE AND SHALL NOT OBLIGATE CTS TO SELL THE PRODUCTS DESCRIBED HEREIN OR ANY OTHER PRODUCTS. CTS MAY,
IN ITS SOLE DISCRETION, MODIFY OR DISCONTINUE THE SALE OF ITS PRODUCTS AT ANY TIME WITHOUT NOTICE. CTS MAKES NO WARRANTY, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PRODUCTS REFERENCED OR INFORMATION PROVIDED
HEREIN.
CTS® is a registered trademark of CTS Corporation.
CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108
Tel. [phone] Fax: [phone] www.ctscorp.com