407F35D032M0000 Datasheet, PDF (2/3 Pages) CTS Corporation – Model 407 Surface Mount Quartz Crystal

ELECTRICAL CHARACTERISTICS
Model 407
7.0x5.0mm Low Cost
Surface Mount Crystal
PARAMETER
Operating Mode (Note 1)
Crystal Cut
Frequency Range
Frequency Tolerance @ 25°C
Frequency Stability Tolerance
(Operating Temperature Range, Referenced to 25°C Reading)
Operating Temperature Range
Storage Temperature Range
Equivalent Series Resistance
Load Capacitance or Resonance Mode
Shunt Capacitance (C₀)
Drive Level
Aging @ 25°C
Reflow Condition, per JEDEC J-STD-020
VALUE
Fundamental or 3^RD Overtone
AT-Cut
6.0 MHz to 156.25 MHz
± 30 ppm Standard
(± 10 ppm, ±15 ppm and ± 20 ppm Available)
± 50 ppm Standard
(± 10 ppm, ±15 ppm, ± 20 ppm, ± 30 ppm and ± 40 ppm Available)
-20°C to +70°C Standard
(-40°C to +85°C Available)
-55°C to +125°C
See ESR Table
See Ordering Information
7.0 pF Maximum
25 µW Typical, 100 µW Maximum
± 3 ppm/year maximum
+255°C ± 5°C, 10 Seconds Maximum
EQUIVALENT SERIES RESISTANCE TABLE
FREQUENCY RANGE
6.000 MHz - 7.999 MHz
8.000 MHz - 15.999 MHz
16.000 MHz - 50.000 MHz
30.001 MHz - 60.000 MHz
60.001 MHz - 156.25.000 MHz
MODE of OSCILLATION
Fundamental
Fundamental
Fundamental
3^RD Overtone
3^RD Overtone
ESR Maximum
80 Ohms
60 Ohms
40 Ohms
100 Ohms
80 Ohms
MECHANICAL SPECIFICATIONS
PACKAGE DRAWING
( 7.00 ±0.20 )
0.276 ±0.008
( 5.00 ±0.20 )
0.197 ±0.008
CTS**YYWW
● XXXMXXXX
( 1.30 )
0.051 ^Max
( 1.0 )
0.039
( 4.6 )
0.181
( 1.2 )
0.047
1
2
( 2.54 )
0.100
4
3
4
3
1
2
Top View
Key: ^{( MM )}
Inch
MARKING INFORMATION
1. ** - Manufacturing Site Code.
2. YYWW – Date Code, YY – Year, WW – Week.
3. XXXMXXXX – Frequency marked with 4
significant digits after the ‘M’.
4. Complete CTS part number, frequency value
and date code information must appear on
reel and box labels.
SUGGESTED SOLDER PAD GEOMETRY
0.087 [2.20]
0.055 [1.40]
4
3
0.100 [2.54]
Bottom View
Notes:
1. Termination pads (e4), barrier-plating is nickel (Ni) with gold (Au) flash plate.
2. Terminations #2, #4 and the metal lid are connected internally.
End user may connect these pins to circuit ground.
1
2
0.252 [6.40]
Document No. 008-0261-0
Page 2 - 3
Ù  Ù  Ù  CTS Electronic Components, Inc. Ù  171 Covington Drive Ù  Bloomingdale, IL 60108 Ù  Ù  Ù 
[mm]
Key: _Inch
Rev. G